Parting out - 1986 325es

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jand3rson
    Banned
    • Oct 2003
    • 37587

    #1

    Parting out - 1986 325es

    Another one bites the dust! I just got finished tearing down a bronzit '86 325es for a friend of mine that he totalled last year, and there's tons of good parts from this car available! So here's how this is going to work:

    Everything is already off of the car, so if you want pics of anything, please feel free to ask, and I'll get back to you via PM as soon as possible.

    Some of these items WILL NOT be available to ship, they are just too much of a pain in the ass or too effing heavy to make it worth it.

    Prices listed are OBO, and DO NOT include shipping. If you want a part, give me your zip, and I'll get you an estimate on shipping. I will go overseas at the buyer's expense. No lowballing. Prices will be set at what I feel to be a fair price, but I will haggle! If you're inerested in a part, PM me, and we'll figure it out. I'm parting this car out for a friend of mine, and all the money is going back to him. I will keep this thread open and updated until interest and/or parts begin to run thin, then the rest goes on the 'bay.

    325e cylinder head with 20,000 miles - $100
    325e intake manifold w/ throttle body - $50
    Early model radiator, great condition - $50
    Getrag 260 5 speed transmission (200k miles) - $150 (pickup only)
    Driveshaft - $100
    AC compressor x 2 - $25 Each
    Power steering pump - $25
    Alternator - $35
    Rear brake calipers (pair) - $25
    iS trunk lip spoiler (one minor damaged area, easily fixed) - $40
    M-Tech I steering wheel (bad leather) - $35
    UNCRAKCED shift console w/ window switch cutouts ONLY - $50
    HVAC panel - $40
    Deluxe OBC (no harness) - $35
    Steering column shrouds - $10
    Tan interior door cars (full set) - $75
    Tan door handles/map pockets - $35
    Tan rear parcel shelf - $25
    Overhead check panel - $10
    BRAND NEW wiper motor - $75
    Full set good engine hoses - $25
    Last edited by Jand3rson; 07-12-2008, 08:00 AM.
  • Jand3rson
    Banned
    • Oct 2003
    • 37587

    #2
    *BUMP*

    One more go at all of this stuff, and then I have to list it all on ebay tomorrow. Get it while it's cheap!

    Comment

    • expressfish
      E30 Addict
      • May 2008
      • 526

      #3
      was one of the a/c compressors working ??? I need the lower steering, brake/clutch arm / wiring cover. email me pics if possible to comfirm parts......egarcia@sailandski.com OHHH and shipping to 78201, Thanks in advance ohhh again. and if you have a pass side window motor / regulator.....heater valve<<the model that has the two alum tubes thru the firewall.
      Last edited by expressfish; 07-12-2008, 08:57 AM. Reason: added parts
      [sigpic

      Comment

      • speedhop
        E30 Mastermind
        • Aug 2006
        • 1509

        #4
        Did this one have the sheet metal shifter plate?

        If so, I'll take that. Let me know.
        www.ryanwhopkins.com

        Comment

        • blau_e30
          Noobie
          • Jul 2008
          • 30

          #5
          was the engine working fine when you removed the cylinder head?

          Comment

          • Jand3rson
            Banned
            • Oct 2003
            • 37587

            #6
            Originally posted by expressfish
            was one of the a/c compressors working ??? I need the lower steering, brake/clutch arm / wiring cover. email me pics if possible to comfirm parts......egarcia@sailandski.com OHHH and shipping to 78201, Thanks in advance ohhh again. and if you have a pass side window motor / regulator.....heater valve<<the model that has the two alum tubes thru the firewall.
            I only have the compressor, and it was working when the car was driven last. Shipping for the comp will run about $25-30, heavy bugger.

            Originally posted by blau_e30
            was the engine working fine when you removed the cylinder head?
            Yes, the engine ran great before the car was wrecked. Cylinder head is in great shape, very clean.

            Originally posted by speedhop
            Did this one have the sheet metal shifter plate?
            Sorry, no shifter plate.

            Comment

            • Edgars325e
              Advanced Member
              • Jun 2008
              • 179

              #7
              Tan rear parcel shelf pic if u got ne ....
              sigpic

              Comment

              • Jand3rson
                Banned
                • Oct 2003
                • 37587

                #8
                Originally posted by Edgars325e
                Tan rear parcel shelf pic if u got ne ....
                I'll get a pic of that for you tomorrow.

                Comment

                • z31maniac
                  I waste 90% of my day here and all I got was this stupid title
                  • Dec 2007
                  • 17566

                  #9
                  Pic of console? I'm correct in assuming no cutout for the lockout switch?
                  Need parts now? Need them cheap? steve@blunttech.com
                  Chief Sales Officer, Midwest Division—Blunt Tech Industries

                  www.gutenparts.com
                  One stop shopping for NEW, USED and EURO PARTS!

                  Comment

                  • Jand3rson
                    Banned
                    • Oct 2003
                    • 37587

                    #10
                    Originally posted by z31maniac
                    Pic of console? I'm correct in assuming no cutout for the lockout switch?
                    None, just cutouts for the window switches.

                    Comment

                    • H&Re30
                      Wrencher
                      • Aug 2006
                      • 242

                      #11
                      hey, got the steering rack still?

                      if so, how much shipped to 83616?
                      sigpic

                      Comment

                      • Sokoji
                        Noobie
                        • Jun 2008
                        • 13

                        #12
                        If you still have them can I get some pics on these items:
                        Steering wheel
                        Tan door handles/map pockets
                        IS trunks lip spolier
                        Getrag 260 transmission

                        Also would you happen to have the drivers side seat in good condition?

                        Comment

                        • Jand3rson
                          Banned
                          • Oct 2003
                          • 37587

                          #13
                          I'll get pics of these things for you guys tomorrow morning, sorry, I got busy w/ other stuff.

                          Comment

                          • blau_e30
                            Noobie
                            • Jul 2008
                            • 30

                            #14
                            sent you a pm

                            Comment

                            • chadthestampede
                              No R3VLimiter
                              • Jul 2008
                              • 3600

                              #15
                              pm sent
                              Originally posted by LJ851
                              I programmed my oven to turn off when my pizza was done, should i start a build thread?

                              Feedback

                              Comment

                              Working...