*** if interested email me, bmw at bjerols dot com ***
Looking to sell a set of heated black manual Vaders from a 1995 M3. I originally purchased these to put into my e30 iX as the stock "comfort" seats are anything but!
I went about fabricating seat brackets to bolt them into my e30, however with the extra large transmission hump (for the xfer case on the iX), it was proving a little difficult and it would (obviously) be much easier to put e30 sports seats in. So I purchased a seat of heated e30 seats from an e30 M3 instead.
Here are some pictures from when I got the seats including pictures of the wear on the drivers side lower bolster (no rip/tear/hole, but worn down):
I believe I paid $650 for them, so I am looking for the same in return. Not really willing to ship unless it's last resort as they are extremely heavy. I will look up what I paid for the rears if you are interested in buying both.
Here are pictures of the 50/50 split rears (please note they are dusty from being stored and the marks in the photo are from the camera and are not on the seats, they appear to be 9.5 out of 10 condition wise):
I believe I paid $250 for them and would be looking for the same... these I would be more willing to ship
Seats are in Montville, NJ (northern NJ... near 287, 80, 46, 280, Parkway). Would be willing to meet someone within 100miles if they are coming from far away.
e30 DIY instructions here (which is apparently much easier for regular e30s rather than iXers like myself): http://lukasmotors.com/e36_m3_vader_seat_install.htm
Buy with confidence, I am a member of the BMW CCA for nearing 10 years and I have been on the NJ Chapter's autocross committee for several of them. Also, I have been a moderator at E46Fanatics since 00/01. And here are my transaction feedback from some BMW forums:
regards
Brent
*** if interested email me, bmw at bjerols dot com ***
Looking to sell a set of heated black manual Vaders from a 1995 M3. I originally purchased these to put into my e30 iX as the stock "comfort" seats are anything but!
I went about fabricating seat brackets to bolt them into my e30, however with the extra large transmission hump (for the xfer case on the iX), it was proving a little difficult and it would (obviously) be much easier to put e30 sports seats in. So I purchased a seat of heated e30 seats from an e30 M3 instead.
Here are some pictures from when I got the seats including pictures of the wear on the drivers side lower bolster (no rip/tear/hole, but worn down):
I believe I paid $650 for them, so I am looking for the same in return. Not really willing to ship unless it's last resort as they are extremely heavy. I will look up what I paid for the rears if you are interested in buying both.
Here are pictures of the 50/50 split rears (please note they are dusty from being stored and the marks in the photo are from the camera and are not on the seats, they appear to be 9.5 out of 10 condition wise):
I believe I paid $250 for them and would be looking for the same... these I would be more willing to ship
Seats are in Montville, NJ (northern NJ... near 287, 80, 46, 280, Parkway). Would be willing to meet someone within 100miles if they are coming from far away.
e30 DIY instructions here (which is apparently much easier for regular e30s rather than iXers like myself): http://lukasmotors.com/e36_m3_vader_seat_install.htm
Buy with confidence, I am a member of the BMW CCA for nearing 10 years and I have been on the NJ Chapter's autocross committee for several of them. Also, I have been a moderator at E46Fanatics since 00/01. And here are my transaction feedback from some BMW forums:
regards
Brent
*** if interested email me, bmw at bjerols dot com ***
Comment