Brand New E30 Turbo Setup For M20 Brand New E30 Turbo Setup For M20

[Aveman]

Selling my turbo setup, it's unused and mostly brand new parts.

Comes with a high quality schedule 10 piping stainless steel manifold. (New)

HX35 12 cm2 brand new holset turbo, it's the wastegated version that I have removed the wastegate off of.



25x12x3" Intercooler with mounting brackets I made (has 2.5" inlet and outlet)
(New)

Picture mounted on my car



-RFL BOV (New)
-38MM Wastegate with two springs one 7 psi and 15psi (New)
-RC/MSD Style 42lb injectors (Used, were rebuilt before I got them)
-Innovative Wideband LC-1 Wideband (Used, just put in my car)
-Couplers and IC piping that still has to be cut
-Turbo feed fittings
-Perma oil cooler kit, large core, works perfect with m20 (Used)

Here are the parts mocked up on the motor after rebuild.



This setup is very similar to the setup 90e30i is running and is capable of well over 300 WHP.

Price $2500 obo.

[wickedE30]

If you are willing to part,I'll be intrested in the manifold.

[Aveman]

Alright cutting to the chase, $2000 firm.
I'll break down the cost of the parts if you wanted to piece together a similar kit.
Manifold $900 and about 2-3 weeks to have made.
Turbo $1300 to pick up brand new.
Injectors commonly go for around $200-250 on ebay
Intercooler abour $150
Oil cooler kit about $150
Wideband LC-1 $200
Couplers/piping $150
Fittings $25
WG and BOV $150-200
That's over 3gs and would take some time to aquire.

[vlad]

what kind of ECU chip you were going to run with this turbo set up ?

[Aveman]

what kind of ECU chip you were going to run with this turbo set up ?

I had the car setup on Megasquirt. I actually setup and tuned the Megasquirt on my buddies car with almost the same setup. It was making 330 WHP at 15 psi.

Here is a video of the dyno run.

http://www.youtube.com/watch?v=a6rRjp4qQeQ

This setup with a stock intake manifold would likely make more torque.

[houstonh]

any more info on that intake manifold in the video?

[Aveman]

any more info on that intake manifold in the video?

http://i47.photobucket.com/albums/f161/weirtech/DSC09239.jpg

It was made by the same guy that made the turbo manifold. My buddy designed it and he welded it up.

[M20_TURBO]

Bump

[M20_TURBO]

Here is the dyno graph of if identical turbo setup on my car.

[Aveman]

Here is a similar quality manifold as offered with the kit, check the price :?

http://store.666fabrication.com/m20-6-into-1-tubular-turbo-mani.html

Here is a couple more pictures of my manifold

[catchuk]

Im just now reading and learning about turbo setups, this look like a good deal, I really only want to tune the car to about 240 to 250 max hp, im using my e30 as a daily driver so it needs to be reliable. would this turbo be too big for that? I read the a smaller t3 my be good as it spools up quickly.

[Aveman]

Im just now reading and learning about turbo setups, this look like a good deal, I really only want to tune the car to about 240 to 250 max hp, im using my e30 as a daily driver so it needs to be reliable. would this turbo be too big for that? I read the a smaller t3 my be good as it spools up quickly.

Do you want 250 crank HP or wheel HP. If you ran 10 psi with this turbo it would spool around 3K with this manifold. It would be decent, you could get it downgraded to a 9cm2 exhaust housing making it spool around 2500 rpm and be a fun daily driver and extremely reliable. This turbo has something called Map width enhancement and a silencer, it's a modern turbo. You could upgrade the exhaust side to 16cm2 later and make 400 WHP but the exhaust housing on there now will work great for around 250 WHP at 10 psi. The intake side is already as upgraded as can be on a HX35.

If you were really interested I could get the exhaust housing switched over to a 9cm2 non wastegated before shipping for no charge.

[Aveman]

Sale Pending...:p

[Aveman]

Sold