I'm moving, and cleaning my garage of spare parts. Let's get right to it, prices include shipping, here's the list:
MTech I Steering Wheel
[Hi-Res]
$65
The pictured wheel is $65 because it's missing the M-Stripe.
The other wheel is in similar shape, but has the M-Stripe so it's $75. [SOLD]
Ireland Engineering Urethane Transmission Mounts [Pending Sale]
[Hi-Res]
$60
These are from Ireland Engineering. The Ireland Engineering store is Here. You'll need to go to the Drivetrain subcategory. I had them in my car for 5 miles and took them out promptly because they accentuated a vibration in my engine. "The studs are 8mm so you don't have to redrill the holes. These mounts have 2 steel cups molded inside so they don't need any additional exterior reinforcing like the mounts offered by others. They are not biodegradable like the regular rubber mounts. These are stiffer than the rubber mounts but not too stiff for street cars. Stiffer trans mounts improve shifter feel and can reduce the potential of missed shifts."
13 Button OBC
[Hi-Res]
$25
Standard 13 Button OBC from an '87 iS. Needs a new light bar behind the digital display. No wiring harness, just the OBC. It works.
Gauge Cluster SOLD
[Hi-Res]
$60
Gauge cluster from an '87 iS. Everything works.
Z3 Short Shifter 2.8/3.0 SOLD
[Hi-Res]
$45
This is BMW part number 25111222884. Take a look at this post for LOTS of information about Z3 shifters. This was installed in my car for about 1.5 years before I upgraded to a UUC Evo 3.
Bavarian Autosport Wire Cup Holder SOLD
No picture.
$20
BavAuto sold these things years ago. It's basically a think, black piece of metal wire that is bent to hold a cup on one end with a small metal plate welded to the other side. It cleverly mounts to the two screws hidden behind the ash tray in the center console. The wire then forms a circle that hangs into the passenger footwell to hold a cup.
MTech I Steering Wheel
[Hi-Res]$65
The pictured wheel is $65 because it's missing the M-Stripe.
The other wheel is in similar shape, but has the M-Stripe so it's $75. [SOLD]
Ireland Engineering Urethane Transmission Mounts [Pending Sale]
[Hi-Res]$60
These are from Ireland Engineering. The Ireland Engineering store is Here. You'll need to go to the Drivetrain subcategory. I had them in my car for 5 miles and took them out promptly because they accentuated a vibration in my engine. "The studs are 8mm so you don't have to redrill the holes. These mounts have 2 steel cups molded inside so they don't need any additional exterior reinforcing like the mounts offered by others. They are not biodegradable like the regular rubber mounts. These are stiffer than the rubber mounts but not too stiff for street cars. Stiffer trans mounts improve shifter feel and can reduce the potential of missed shifts."
13 Button OBC
[Hi-Res]$25
Standard 13 Button OBC from an '87 iS. Needs a new light bar behind the digital display. No wiring harness, just the OBC. It works.
Gauge Cluster SOLD
[Hi-Res]$60
Gauge cluster from an '87 iS. Everything works.
Z3 Short Shifter 2.8/3.0 SOLD
[Hi-Res]$45
This is BMW part number 25111222884. Take a look at this post for LOTS of information about Z3 shifters. This was installed in my car for about 1.5 years before I upgraded to a UUC Evo 3.
Bavarian Autosport Wire Cup Holder SOLD
No picture.
$20
BavAuto sold these things years ago. It's basically a think, black piece of metal wire that is bent to hold a cup on one end with a small metal plate welded to the other side. It cleverly mounts to the two screws hidden behind the ash tray in the center console. The wire then forms a circle that hangs into the passenger footwell to hold a cup.
Comment