It's time to clear the garage for a new project I have in the works so I am parting with and/or parting out my unbelievably quick 1991 318is that has a few mods. ;)
I will consider selling this car complete for $16k and that would take precedent over the part out, but here is the list of what will initially be available (part pictures to follow):
1998 S50B32 w/ approx. 62,000mi, A/C and secondary air pump removed. Rouge Engineering LTW flywheel and spring centered clutch, and ZF 5-speed transmission. US S50 Oil pump w/ E34 pan and pickup. The only codes it throws are related to A/C and secondary air pump removal (that the pumps are not operating - this does not effect performance). Comes with all the EWS-II componants. It would be a plug and play swap on a 318is. Transmission shifts smoothly with no notchy-ness or grinding.
$7000
E30M3 5-lug swap - Complete 5-lug swap with E30M3 / Ground Control / Vorshlag parts. The E30M3 parts have less than 4K miles on them and were installed new by the previous owner. Ground Control coil-over setup with custom valved Koni's. Two sets of springs (500/750 and 400/650). Vorshlag adjustable camber/caster plates.
$3000
Gustave's E30M3 Roll Center Spacers. Improves front geometry on lowered cars.
$150
Pair of Recaro Pole Position Leather/Suede seats. There are some scratches on one seat that occured during initial fitment. Includes black, steel side brackets.
$1300
Team Dynamic TD ProRace 1.2 Wheels 17x9 et30 with Dunlop Direzza Sport Z1 Star Spec 245-40-17 Tires. The wheels are perfect and the tires only have a couple miles on them.
$1200
Massive E30M3 Front BBK (4-piston calipers, hats, rotors, and pads)
$1000
DTM-Style Dual Master/Single Clutch Pedal Cluster.
$550
Harrison Motorsports brake ducts with valence duct adapters and hi-temp orange silicon hose.
$225
Full Stainless 3" Exhaust. Fits on stock hangers.
$350
PWR All Aluminum Radiator
$350
3.46 Limited Slip Differential w/ M-Coupe cover.
$400
Rouge Engineering E36M3 Short Shifter
$300
Rear Subframe with shortened Muzzi Motorsports aluminum mounts. The shortened mounts correct camber/toe issues associated with lowering.
$225
Front subframe. Pre-notched to clear Euro S50 headers.
$100
Z3 Quick Ratio steering rack. Ready to plug and play with a non-airbag E30.
$200
Ireland Engineering Flares. Pre-cut, shaped and ready to mount. Includes rubber trim for a clean look. Currently painted black with SEM Trim Paint.
$200
Cibie Lights. Direct replacement for sealed beam lights. These are incredible and blow away euro elips. I will include a set of euro grills with the lights. I can check the bulb wattage if interested.
$225
E30M3 Stock Brakes (front/rear). Calipers, rotors and pads.
$200
E30M3 Sway Bars (front/rear). Includes front adjustable links.
$150
Ireland Engineering 25mm Hollow Front Sway Bar. Includes adjustable linkage parts.
$150
Treehouse Racing CAB's (white bushing material). These are necessary for clearance when using euro S50 headers. Green paint is chiping, but they are quiet and show no signs of binding.
$100
E30M3 Driveshaft
$150
E28-M5 Engine mounts (trapazoid-shaped, light blue color)
$100
Rouge Engineering Re-inforced tranmission mounts. Recommended for use with their SSK.
$45
Anybody interested in the car or the parts can contact me via PM, or email (motomotions@gmail.com)
Thanks,
Mike B.
I will consider selling this car complete for $16k and that would take precedent over the part out, but here is the list of what will initially be available (part pictures to follow):
1998 S50B32 w/ approx. 62,000mi, A/C and secondary air pump removed. Rouge Engineering LTW flywheel and spring centered clutch, and ZF 5-speed transmission. US S50 Oil pump w/ E34 pan and pickup. The only codes it throws are related to A/C and secondary air pump removal (that the pumps are not operating - this does not effect performance). Comes with all the EWS-II componants. It would be a plug and play swap on a 318is. Transmission shifts smoothly with no notchy-ness or grinding.
$7000
E30M3 5-lug swap - Complete 5-lug swap with E30M3 / Ground Control / Vorshlag parts. The E30M3 parts have less than 4K miles on them and were installed new by the previous owner. Ground Control coil-over setup with custom valved Koni's. Two sets of springs (500/750 and 400/650). Vorshlag adjustable camber/caster plates.
$3000
Gustave's E30M3 Roll Center Spacers. Improves front geometry on lowered cars.
$150
Pair of Recaro Pole Position Leather/Suede seats. There are some scratches on one seat that occured during initial fitment. Includes black, steel side brackets.
$1300
Team Dynamic TD ProRace 1.2 Wheels 17x9 et30 with Dunlop Direzza Sport Z1 Star Spec 245-40-17 Tires. The wheels are perfect and the tires only have a couple miles on them.
$1200
Massive E30M3 Front BBK (4-piston calipers, hats, rotors, and pads)
$1000
DTM-Style Dual Master/Single Clutch Pedal Cluster.
$550
Harrison Motorsports brake ducts with valence duct adapters and hi-temp orange silicon hose.
$225
Full Stainless 3" Exhaust. Fits on stock hangers.
$350
PWR All Aluminum Radiator
$350
3.46 Limited Slip Differential w/ M-Coupe cover.
$400
Rouge Engineering E36M3 Short Shifter
$300
Rear Subframe with shortened Muzzi Motorsports aluminum mounts. The shortened mounts correct camber/toe issues associated with lowering.
$225
Front subframe. Pre-notched to clear Euro S50 headers.
$100
Z3 Quick Ratio steering rack. Ready to plug and play with a non-airbag E30.
$200
Ireland Engineering Flares. Pre-cut, shaped and ready to mount. Includes rubber trim for a clean look. Currently painted black with SEM Trim Paint.
$200
Cibie Lights. Direct replacement for sealed beam lights. These are incredible and blow away euro elips. I will include a set of euro grills with the lights. I can check the bulb wattage if interested.
$225
E30M3 Stock Brakes (front/rear). Calipers, rotors and pads.
$200
E30M3 Sway Bars (front/rear). Includes front adjustable links.
$150
Ireland Engineering 25mm Hollow Front Sway Bar. Includes adjustable linkage parts.
$150
Treehouse Racing CAB's (white bushing material). These are necessary for clearance when using euro S50 headers. Green paint is chiping, but they are quiet and show no signs of binding.
$100
E30M3 Driveshaft
$150
E28-M5 Engine mounts (trapazoid-shaped, light blue color)
$100
Rouge Engineering Re-inforced tranmission mounts. Recommended for use with their SSK.
$45
Anybody interested in the car or the parts can contact me via PM, or email (motomotions@gmail.com)
Thanks,
Mike B.
Comment