H&R coilovers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vodomagoo
    Wrencher
    • May 2004
    • 286

    #1

    H&R coilovers

    H&R coilovers with an extra set of helpers for the front if you wana go with a shorter spring. They were used on my old car and have about 7k on them. One small cut on the spindle on one of them where a race was cut off of it nothing major, used them like this but it is visible and I want to be up front about that.

    Looking to get $750 + shipping obo on these. New they are 2k + from turner
    no rear height adjusters included, I didnt use them and no longer have them
    http://www.turnermotorsport.com/html...UCT_ID=29577-1


    Pics of the fronts for now (rears later)


    Last edited by vodomagoo; 12-02-2008, 07:43 PM.
  • SamE30e
    R3V Elite
    • Sep 2007
    • 4319

    #2
    come with rears?
    1985 325e 2.8 Turbo VEMS

    Comment

    • vodomagoo
      Wrencher
      • May 2004
      • 286

      #3
      yes edited above with pic, no rear height adjusters though

      Comment

      • E30Idea
        R3VLimited
        • Mar 2007
        • 2196

        #4
        Spring rates? Standard H&R Race springs?
        ** Lot's of M20 turbo parts for sale.**



        Turn key track car.

        http://www.r3vlimited.com/board/showthread.php?t=222066

        Comment

        • vodomagoo
          Wrencher
          • May 2004
          • 286

          #5
          They are H&R coilover rate's, different then all of there other set ups. With that said they are 400lbs front springs and the rears are progressive rate

          Comment

          • cactusjacks1
            E30 Fanatic
            • Sep 2004
            • 1216

            #6
            Originally posted by vodomagoo
            They are H&R coilover rate's, different then all of there other set ups. With that said they are 400lbs front springs and the rears are progressive rate
            Were they off your M3? If not, are the struts for 4 or 5 lug?

            Thanks,

            Jack
            [I

            Comment

            • rThor432
              No R3VLimiter
              • Feb 2007
              • 3907

              #7
              ^^I was wondering the same thing. Cant quite tell from the picture if they are M3 or not.

              Comment

              • vodomagoo
                Wrencher
                • May 2004
                • 286

                #8
                not m3, m3 front struts have spindles that bolt off these are for a 4 lug non m3 e30 they came off my old 325es swap car

                Comment

                • HustlinDa858
                  Noobie
                  • Oct 2008
                  • 19

                  #9
                  does it snow where u live?

                  Comment

                  • vodomagoo
                    Wrencher
                    • May 2004
                    • 286

                    #10
                    Yes it did but the car was never used in the snow with this suspension on it. I did not drive it unless the roads were clean.

                    Comment

                    • vodomagoo
                      Wrencher
                      • May 2004
                      • 286

                      #11
                      Pics of my old car dropped on the coilovers. high fenders in the rear it was a 87'




                      Comment

                      • Jim Lepage
                        E30 Enthusiast
                        • Jul 2008
                        • 1138

                        #12
                        Was it all the way down front and rear ?
                        E30S54 - Scale Suspension / Unix Performance Coilovers - 17x8 and 17x9 BBS E50

                        Comment

                        • vodomagoo
                          Wrencher
                          • May 2004
                          • 286

                          #13
                          In the rear yes but with adjusters so subtract another 1/4" from that without the adjusters, which I eventually removed but dont have pics of when it was done. You can match that height with a couple of spring pads no problem if you dont want to get adjusters from tc kline or h&r which I felt were not needed. The front is not all the way down maybe 1/2 the way down. The rims in the pics are 17's btw

                          Comment

                          • vodomagoo
                            Wrencher
                            • May 2004
                            • 286

                            #14
                            bump

                            Comment

                            • vodomagoo
                              Wrencher
                              • May 2004
                              • 286

                              #15
                              Anyone?

                              Comment

                              Working...