Just selling some stuff I have sitting around, all prices are OBO and plus shipping.
1995 M3
Auto;)
130k - Runs great
Autothority cat back, CAI, and transmission software
19x9 Breyton Magic Sports, they have some chipping and pitting of the chrome. They also have some curb rash, but they all appear to be straight. It will need two new front tires.
Needs a new ignition tumbler, and a good amount of other TLC
Sold for parts.
$3500 OBO
It is what it is, and nothing more.
I'm also selling my jeep that I've had for a little while, this is a great jeep even with the high mileage.
1989 Cherokee Pioneer, 4.0l, 4wd, 286k
Leaks a little bit of oil, its going to need rear wheel cylinders and possibly a new master cylinder. (It has a really spongy brake pedal right now, and has travel almost to the floor. I bled the system but the problem is still there) But overall this thing is awesome, the engine runs great and 4wd works perfectly.
$500 OBO
Ok and to the E30 stuff.
'93 525i M50
There was some confusion about the mileage being 115k or 130k on this motor. So I'm just going to advertise it as 130k
Compression numbers:
Cyl 1: 210
Cyl 2: 200
Cyl 3: 210
Cyl 4: 195
Cyl 5: 195
Cly 6: 200
This motor is in great shape, and came out of a auto 525i that got rear ended. It comes with all belt driven acc., E34 wiring harness, E36 mount arms, red label 413 and E34 oil pan and dipstick.
It also comes with... Water pump, thermostat housing, thermostat, intake manifold gaskets (The oval ones), throttle body gasket, exhaust manifold gaskets, rear main seal, spark plug gaskets (the 2 strips of 3), new exhuast studs + coppers nuts, valve cover gasket, vanos gasket, upper and lower timing cover gaskets, oil pan gasket, oil pressure and water temp sensors...and probably some other stuff I'm forgetting..all of these parts are NIB from autohausAZ.
It's going to need a new water pump pulley, and a set of injectors.
Shipping will vary, but it should be around $200. It is about to be screwed to a pallet and plastic wrapped. Local pick up is available
$1000 OBO
Big box of new stuff
Picture of damage that happened when it got shipped to me, you can see the missing piece of metal in this picture. This is the top right mounting point for the thermo housing, I still have the piece of metal and it could be welded back on/jb welded and shouldn't be a problem. It still holds just fine with 3/4 of the threads.
Some turbo stuff..all of this stuff is brand new
T3 to T3 with 38mm wastegate port.
$45 shipped
eBay bov with 3" polished adapter pipe. Black coupler not included
$50 shipped with gaskets
4" inlet filter
$25 shipped
42lb Flow Matched Racetronix injectors, more info at racetronix.com
$230 shipped
Some 304ss elbows, these sell for $10-13 from mcmaster. I'm selling them for $9 each, with a discount if you buy all of them. I also have 3ft of straight 304ss.
$9 each $40 3ft of straight
I have some other stuff I need to get pictures of, 38mm waste gate, 3" v-band clamp kit, late model fogs, 3" polished turbo piping set w/t bolt clamps and black silicon couplers...and some other stuff.
I'm also selling brand new H&R race springs and billy sports for a friend.
$320 for the race springs
$400 for the bilsteins
1995 M3
Auto;)
130k - Runs great
Autothority cat back, CAI, and transmission software
19x9 Breyton Magic Sports, they have some chipping and pitting of the chrome. They also have some curb rash, but they all appear to be straight. It will need two new front tires.
Needs a new ignition tumbler, and a good amount of other TLC
Sold for parts.
$3500 OBO
It is what it is, and nothing more.
I'm also selling my jeep that I've had for a little while, this is a great jeep even with the high mileage.
1989 Cherokee Pioneer, 4.0l, 4wd, 286k
Leaks a little bit of oil, its going to need rear wheel cylinders and possibly a new master cylinder. (It has a really spongy brake pedal right now, and has travel almost to the floor. I bled the system but the problem is still there) But overall this thing is awesome, the engine runs great and 4wd works perfectly.
$500 OBO
Ok and to the E30 stuff.
'93 525i M50
There was some confusion about the mileage being 115k or 130k on this motor. So I'm just going to advertise it as 130k
Compression numbers:
Cyl 1: 210
Cyl 2: 200
Cyl 3: 210
Cyl 4: 195
Cyl 5: 195
Cly 6: 200
This motor is in great shape, and came out of a auto 525i that got rear ended. It comes with all belt driven acc., E34 wiring harness, E36 mount arms, red label 413 and E34 oil pan and dipstick.
It also comes with... Water pump, thermostat housing, thermostat, intake manifold gaskets (The oval ones), throttle body gasket, exhaust manifold gaskets, rear main seal, spark plug gaskets (the 2 strips of 3), new exhuast studs + coppers nuts, valve cover gasket, vanos gasket, upper and lower timing cover gaskets, oil pan gasket, oil pressure and water temp sensors...and probably some other stuff I'm forgetting..all of these parts are NIB from autohausAZ.
It's going to need a new water pump pulley, and a set of injectors.
Shipping will vary, but it should be around $200. It is about to be screwed to a pallet and plastic wrapped. Local pick up is available
$1000 OBO
Big box of new stuff
Picture of damage that happened when it got shipped to me, you can see the missing piece of metal in this picture. This is the top right mounting point for the thermo housing, I still have the piece of metal and it could be welded back on/jb welded and shouldn't be a problem. It still holds just fine with 3/4 of the threads.
Some turbo stuff..all of this stuff is brand new
T3 to T3 with 38mm wastegate port.
$45 shipped
eBay bov with 3" polished adapter pipe. Black coupler not included
$50 shipped with gaskets
4" inlet filter
$25 shipped
42lb Flow Matched Racetronix injectors, more info at racetronix.com
$230 shipped
Some 304ss elbows, these sell for $10-13 from mcmaster. I'm selling them for $9 each, with a discount if you buy all of them. I also have 3ft of straight 304ss.
$9 each $40 3ft of straight
I have some other stuff I need to get pictures of, 38mm waste gate, 3" v-band clamp kit, late model fogs, 3" polished turbo piping set w/t bolt clamps and black silicon couplers...and some other stuff.
I'm also selling brand new H&R race springs and billy sports for a friend.
$320 for the race springs
$400 for the bilsteins
Comment