Parting 318iS(Schwartz)&91 318i Cabrio

[CntrlcoastE30's]

4.11 lsd I believe.

[CntrlcoastE30's]

all pm's replied to

[RecycledTeen]

Do you have the rear ashtray cover (on the cab)?

[PReta]

do you have a radiator support for a m20

[CntrlcoastE30's]

Checking on the rear ash tray cover for the cab - no M20 core support.

[CntrlcoastE30's]

i neeed these pieces both sides

http://e30.bmwdiy.info/bumper-adjust/bumper-adj03.jpg

Replied to your WTB post.
$24 shipped.

[Cobra Jet]

How much for the following parts off of the 318is:

1) UNCUT round connector w/ harness that is coming off the AFM?

2) L & R front amber side parking lights (any damages?)

3) L & R rear bumper cover "sliders" - these are the plastic pieces that are secured to the rear 1/4's on each side UNDER the rear bumper cover

4) defroster switch (can you post a pic of it - any damages?)


What color interior does the 318 have - hard to tell from the pics...

thx!

[keepright->]

pm'd for front valance

[CntrlcoastE30's]

How much for the following parts off of the 318is:

1) UNCUT round connector w/ harness that is coming off the AFM?

2) L & R front amber side parking lights (any damages?)

3) L & R rear bumper cover "sliders" - these are the plastic pieces that are secured to the rear 1/4's on each side UNDER the rear bumper cover

4) defroster switch (can you post a pic of it - any damages?)


What color interior does the 318 have - hard to tell from the pics...

thx!

1. How much of the harness are you looking for?
2. Broken - typical of most.
3. $24 shipped.
4. Will check.
Interior is grey cloth - thrashed/trashed by previous owner. Car was filthy inside with food, food wrappers, etc.

Thank you Phil.

[CntrlcoastE30's]

All PMs replied to.

[Cobra Jet]

1. How much of the harness are you looking for?
2. Broken - typical of most.
3. $24 shipped.
4. Will check.
Interior is grey cloth - thrashed/trashed by previous owner. Car was filthy inside with food, food wrappers, etc.

Thank you Phil.

As for the 318is AFM harness, it should be a short jumper harness. It plugs into the AFM, then the other end of it should also plug into another round connector (the body/engine harness) and may be located down along the frame rail near the vicinity of the PS resevoir... You should not have to cut anything, as both ends should just unplug (or unscrew). As long as it's not damaged and depending on shipped price, I may be interested in that part...