Going to U-Pull-It, anyone need any little E30 bits?

[Wh33lhop]

Did you read my first post? I'm not getting under these cars and pulling out suspension and engine parts.

I wouldn't exactly call two small brackets held in by 2 bolts apiece a major job, but I understand. Thanks anyway man.

[e30-RTN]

HEADLIGHT ADJUSTMENT SCREWS!
please

[Dixon]

Heater control panel cover thingy ma jig!

[wagonizzle]

Well if you're going already... I need a few real small plastic bits. There are plastic screws that hold in the inner glovebox liner, knee bolster and the plastic trunk panel that sits on the inside/trunk side of where the license plate bolts in (actually I could use two of those white guys that the license plate bolts thread into, also) - I need the screws for all of them. Also, if you can get an allen head bolt from the rear sway bar mount plate (facing outward along the rocker in the rear), I need that too. Defrost switch. You should be able to fit all of this in one hand. TIA :D

[dashboardmonkey]

Josh could you grab me a passenger side tweeter sail?

[CorvallisBMW]

Do they have an e46s? I am looking for the e-brake console/armrest/cupholder assembly

[sherpa]

Couple of ABS wheel speed sensors? Too tough to get to?

[E30Inspired]

Where is this U-Pull it?

[joonsup]

i need (1) headlight adjustment screw and cap for my US ellipsoids. if you can get one that'd be awesome

[e30vert]

The little panel that goes right over the steering column and the 2 thumbscrews on the rear that hold it in place. Right below the cluster. Only if the panel is fairly mint.

[Jand3rson]

Heater control panel cover thingy ma jig!

I already have one of those, perfect condition, no cracks. $45 shipped.

The little panel that goes right over the steering column and the 2 thumbscrews on the rear that hold it in place. Right below the cluster. Only if the panel is fairly mint.

I also have one of those, with the screws. $15 shipped.

rear console in perfect shape. Im intersted. How much would you want?

Depends on what they want for it, probably not much. I'll pull it and give you a good price.

[mooseheadm5]

If there is anything that he was unable to get, check out my thread in the FS section.

[cleansti]

working heater/ac blower?

[colombacho]

ix flares and skirts.:D
if you see them anyway.

[Jand3rson]

All I could get was the ebrake console, everything else was pretty much stripped. I also managed to get a pretty decent pair of early tails. They have a couple of little tiny cracks, but just from age, none from impact or that are all the way through.

Also, the 4 door car is zinno, and has a perfectly straight trunklid, hood and driver side fender. The paint is pretty faded, but I bet it could be brought back to life.