FS: Black Roof/Car Vinyl Wraps

[Don Nguyen]

I had this white Mazda MazdaSpeed3 come in to have me vinyl wrap the roof of his car in the 3M dinoc matte carbon fiber vinyl material. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done. As you can see from the pictures, the carbon fiber weave is more noticeable at certain angles and depending on how the light hits it. In some pictures it'll look like just a matte/flat black roof, while in other pictures you can really notice the carbon fiber weave/pattern, which gives it a very cool effect.

Before:




After:
















-Don Nguyen

donathon@gmail.com

[Don Nguyen]

***Note - This is a darker shade that is a completely different and a lot darker shade than all of my other tinted tail light pictures, this is not the standard shade I use***

The owner of this black Maserati brought me his car to tint/smoke the headlights and tail lights of his car with a very dark vinyl film. He was basically going for the blacked out look. This is not a typical shade/darkness that I use, which is always a very light shade. The owner of this car was also in Orange County and drove out to me in Anaheim Hills to get the work done. Light out put is going to be definitely affected by going this dark, but if you're trying to achieve a completely blacked out or murdered out type of look, then this would be it.

Before:






During:


After:








-Don Nguyen

donathon@gmail.com

[Don Nguyen]

I am making plans to be back up in San Jose / Norcal / Bay Area to do vinyl wrap installations again between the dates of December 16th - 21st 2013.

Note - This is a bit last minute, since I would typically like to make a thread 3 weeks in advanced before making my trip up to norcal, but I happen to find some time in my schedule that could possibly work. My next trip after this will most likely not be for another 4-6 months.

Here are links to threads from my last couple of norcal trips:
1 - http://forum.e46fanatics.com/showthr...389&highlight=
2 -http://forum.e46fanatics.com/showthr...186&highlight=

Just a reminder. E-mail (donathon@gmail.com) me to schedule/reserve your appointment slots. Everything is a first come first serve basis. I may have an available time slot one minute and it may be taken the next (this has happened before), so the sooner you can figure out your availability and confirm it with me the better. People who e-mailed me in the past get priority, so if we can't schedule something for you this time, still e-mail me and I will keep you on my priority contact list for the next time I make a trip up to norcal / Bay Area.

For me to process each inquiry as quickly and smoothly as possible, please use the following format below:

Subject title: Norcal December Trip

Type of car:
Material finish/color (IE gloss black, carbon fiber, etc):
Parts you're looking to wrap or size of material(s):

Here are links to pictures the cars that I have worked on and examples of my vinyl work, which I have separated into groups to more easily sort through and view them. My work is not limited to only what's seen/shown below, so feel free to ask if there is something you don't see but are interested in getting done.

Gloss / matte black roof wraps - http://forum.e46fanatics.com/showthr...705158&page=16
3M Di - Noc / 1080 carbon fiber roof wraps - http://forum.e46fanatics.com/showthr...704966&page=13
Blacked out window trim - http://forum.e46fanatics.com/showthr...=734930&page=5
Smoked / tinted tail light pictures - http://forum.e46fanatics.com/showthr...=705594&page=7

Days that I have available at the moment (I will keep this updated as spots fill up):

Monday - December 16
Tuesday - December 17
Wednesday - December 18
Thursday - December 19
Friday - December 20

thanks.

-Don Nguyen

donathon@gmail.com

[manny2slow]

interested in some gloss black.. irvine. 714 654 6110. shoot me a txt

[Don Nguyen]

Text sent.

[Don Nguyen]

The owner of this car previously had me black out the chrome around his window trim and rear trunk bar as well as lightly tint the tai lights. However he decided to come back to also have me wrap the rear trunk spoiler of his car in the 3M 1080 gloss carbon fiber vinyl material as well, to match the real carbon fiber diffuser he just had put on. Hopefully this will give you guys somewhat of an idea of how the gloss carbon fiber vinyl compares to real carbon fiber parts. The owner of this car drove out to my shop in Anaheim Hills/Orange County to have the work done. Note, not all spoilers are possible or practical to wrap due to its shapes/curves, but this one happen to be an exception.















-Don Nguyen

donathon@gmail.com

[Don Nguyen]

These aren’t the best pictures that I have taken, but I had someone request me to post some pictures of work that I’ve done on the new Lexus GS350. For this silver/grey GS350, I vinyl wrapped the roof in gloss black, lightly tinted/smoked the tail lights, and blacked out the center middle section of the front bumper. The owner of this car brought their car to me in Anaheim Hills/Orange County to have the work done. I think overall, the subtle changes to the car gave it a nice different/change of look without making it look too aftermarket or modified.

Before:








Driver/left side tinted/smoked - passenger ride side stock:


After:
















-Don Nguyen

donathon@gmail.com

[Don Nguyen]

The owner of this black BMW E60 550i sedan brought me his car because he was having issues with his factory original paint fading. I went over with him and options that were available for his car, and we decided on going with my gloss black vinyl to give him back that factory finish look. Although minor pits and such still showed through the material, overall, I think the results and pictures speak for themselves. It was a huge improvement over what the owner was dealing with before, as far as the condition of his roof was concerned. The owner of this car was also in Orange County and brought his car to me in Anaheim Hills to have the work done.

Before:










After:












-Don Nguyen

donathon@gmail.com

[Don Nguyen]

Had a request to post some pictures of a white car with gloss black vinyl applied on the trim. The owner of this white Mercedes Benz C63 coupe had me vinyl wrap the chrome/brushed aluminum trim on his car with my gloss black vinyl materials. The owner of this car was in Irvine and drove out to me in Anaheim Hills/Orange County to have the work done. The black trim definitely gave the coupe a much sportier look and complemented the rest of the car fairly well.

Before:






After:










-Don Nguyen

donathon@gmail.com

[Don Nguyen]

This is another car that I did for Hyundai for the most recent SEMA event. I had also done their Veloster that they had built for SEMA the year prior as well. This year they used their SUV the Santa Fe for the SEMA event. They had me come by their facilities to vinyl wrap the top of the SUV in the 3M 1080 gloss carbon fiber vinyl material. Not often that I do the roof of a SUV or such a large car in general. Obviously for this car, the carbon roof was chosen to make it stand out and go with the more aggressively modified look/theme of the car.

Before:






After:










-Don Nguyen

donathon@gmail.com

[Don Nguyen]

Not many people know that I use/have other colors of head/tail light film in addition to the normal tint/smoke films that most people typically have me use on their cars. The owner of this Mini Cooper brought his car by to have me tint his head lights yellow and his tail lights with red. I know the yellow headlights isn’t for everybody, but the owner of this Mini wanted to do something different, and it’s always possible to go back to stock/reversible with vinyl. The owner of this car drove out from Inland Empire to me in Anaheim hills/Orange county to have the work done.

Before:




After (note the headlights are on in these pictures):












-Don Nguyen

donathon@gmail.com

[Don Nguyen]

The owner of this car drove from Los Angeles to me in Orange County/Anaheim Hills to have me do some vinyl work on his brand new white Mercedes Benz CLS 550. We went with gloss black for his roof, side roof rails, and center portion of the lower bumper. Then for the chrome side window trim, we went with matte black for those. Finally, for the tail lights, I used my transparent red vinyl to red out the clear/white portion of his tail lights to give it a single complete red appearance/color.

Before:










After:














-Don Nguyen

donathon@gmail.com

[Don Nguyen]

This specific car is not the typical case of a car coming in with chrome/brushed aluminum trim and wanting me to black out their trim with my vinyl materials. The owner of this BMW E30 M3 brought his car in to have me vinyl wrap the previously painted gloss black trim with my matte black vinyl. I know it may be a bit hard to tell, but if you look at the pictures side by side or back to back it may be easier to notice the differences between how matte black trim vs gloss black trim looks like on a car.

This is also good for those who have asked me in the past how well vinyl will cover up bumps/dents/etc. As you may see in some of the pictures, whoever did the paint job on the trim did not do that good of a job, which left the trim a bit lumpy/uneven. If you can’t see or make it out in the pictures, any imperfections that are underneath the vinyl will show through, as the material is fairly thin and basically takes on the shape of the surface/pieces that they are being applied on over.

Before:






After:














-Don Nguyen

donathon@gmail.com

[Don Nguyen]

The owner of this white Nissan 350z brought me his car to have me vinyl wrap the roof of the car in my gloss black vinyl material. In addition to the roof, I also did his two side vertical pillars with the 3M dinoc matte carbon fiber vinyl material. I believe the owner of this car was from around Long beach and drove his car out to me in Anaheim Hills/Orange county to get the work done. The gloss black, especially on the 350zs or similar smaller two seater cars, the gloss black roof connects and continues the front and rear glass fairly nicely.

Before:




After:


















-Don Nguyen

donathon@gmail.com

[Don Nguyen]

I feel like sometime the only cars I do are BMWs, then I go on a stretch not doing any BMWs for a while. Either way, the owner of this silver E46 BMW M3 brought his car in to have me vinyl wrap the roof of his car in my gloss black vinyl material. It was also a nice change of pace to have a non-white colored car come in for some vinyl work done. The owner of this car drove his car to my shop in Anaheim Hills/Orange County to have the work done. I think the gloss black roof on the silver really contrasts and compliments it fairly well.

Before:




After:










-Don Nguyen

donathon@gmail.com