M10 316 power steering pump bracket

[Andrius.Z]

Hello all,

I'm looking for a power steering pump bracket for M10 316 engine, original part number 32421312196

Thank you,
Andy

[hozzziii]

I drive the same car. Don't have the part for sale, but can get you some pictures if you need a reference or want to fabricate yourself.

[Andrius.Z]

I drive the same car. Don't have the part for sale, but can get you some pictures if you need a reference or want to fabricate yourself.

If you could man, that would fantastic. I managed to get the bracket itself (number 1), but it is mounted on 2 plates one at the front and one at the back, I think I'm able to get a front plate (number 6). I would need a length of part number 7 as in the picture.

Thank you for your help, much appreciated

[Andrius.Z]

And if you could send me a few pictures of how the pump is mounted on that bracket, that would help me too, thank you.

[hozzziii]

Alright, so
I know the whole place is oily and greasy, haven't cleaned it in a while.

This is the top view, on the right you can see the part No. 7 attached to the back of the pump.

Different angle.

I tried to get as close to the block as possible from above the pump, hopefully this helps to show how the pump is mounted.

This is from right next to the pump, you can see the bottom end of part No. 7. And curiously, it looks like part 7 is not just a simple u-turn, there's another connection right next to that.
Also looks like it's been welded and then zinc-plated, so you could make it yourself actually.
and I need some new bushings too, who knew after 36 years, huh.

[Andrius.Z]

Thanks mate appreciate your help on this, I think I was able to find what I need. It only took me 2 weeks of none stop emailing and submitting requests all around the world.

[hozzziii]

My pleasure :)

[Andrius.Z]

Hi hozzzii, coul you do me a last favour and send me a picture of the crankshaft pulley when you have a chance. Thank you.

[hozzziii]

Hi hozzzii, coul you do me a last favour and send me a picture of the crankshaft pulley when you have a chance. Thank you.

For future reference, try to quote or tag the guy you want to talk to, I didn't get a notification for this.
I was just browsing the conversations I was involved in.


I thought you would probably need to see the pulley in relation to the pump, and my engine bay is kinda empty in the part.
I can't get in front of the pulley and get a good picture because as you can see my rad is really close.
Also tried to get it from the exhaust side, wasn't much better than this.
So I hope this is good.