WTB: 325i or 325is driveshaft

[learningcurve86]

I was going to do my guibo and centerbearing last night and discovered that two of the bolts that connect my driveshaft to my guibo were not tight. (they had a full 2 MM of play back and forth). Upon taking it apart I found that one of the bolts had been spinning and has worn down that connection point of the driveshaft to damn-near paper thin.

I would like to buy the front half (if possible I'd prefer not to buy a whole one... but let me know what you've got) of a 325i or 325is driveshaft of any year. -must be manual

paypal ready.

[learningcurve86]

(going to be a bastard and bump the hell out of this thread)

[learningcurve86]

end of the work-day bump

[guibo09]

you cant just buy the front half unless you are willing to have it balanced with your current rear half, just fyi.

[learningcurve86]

i was going to have it balanced at the shop a block from my house. thanks though :)


found a possible solution: a friend gave me his driveshaft from his m42 and i'm going to have it shorted to fit. only going to cost me $80 to have it cut and balanced :)