stuff I need please

[blunttech]

Manual drive shaft from 328i or a m3 from the build date 10/96 up ( 4 bolt rear diff flange)
stock e36 flywheel let me know what you have please

[White325is]

I have a stock S50 e36 flywheel. The clutch surface has surface rust. You can have it for cost of shipping.

[blunttech]

I have a stock S50 e36 flywheel. The clutch surface has surface rust. You can have it for cost of shipping.

youre the man Ill pm you shipping details

[blunttech]

bump.. still need 328 manual d/s

[White325is]

Does it have to be a 328? I have access to a 325..

[blunttech]

Does it have to be a 328? I have access to a 325..

Im running a zf box with the larger 96mm output flange
doesnt the 325 have 78mm ??

[White325is]

Couldn't you swap flanges?

[blunttech]

I suppose i could but i wanted the larger flange as I plan on making big power at some point

if i cant find the larger one in a decent amoun t of time maybe Ill grab yours what do you want for it?

[blunttech]

bump

[turbo325i]

you can also use an early model big guibo shaft with a late csb, I just learned this.

[blunttech]

you can also use an early model big guibo shaft with a late csb, I just learned this.

so like an early eta d/s???

[turbo325i]

Yes. They are hit and miss which ones came with the large guibo, but as far as people have told me they work, so I will be installing mine in a week or so. I can let you know for sure.

I mean the shaft fits the guibo on my zf, and assuming the csb lines up proper and length is correct it will work.

Must use matching csb for year of chassis.

[blunttech]

Yes. They are hit and miss which ones came with the large guibo, but as far as people have told me they work, so I will be installing mine in a week or so. I can let you know for sure.

I mean the shaft fits the guibo on my zf, and assuming the csb lines up proper and length is correct it will work.

Must use matching csb for year of chassis.

ok good info thank you. Let me know how yours works out

[turbo325i]

will do. :)