complete m20 in NC, VA, SC, TN, GA.

[brokEe30]

I need an m20 in NC, VA, SC, TN, GA. I would be interested in any m20 motor but would most like to find an SETA out of an 88. Would also like to find a motor that has been recently been rebuilt, but again anything will do. This is going into an e21 so I would like to have motor, ECU, harness, and tranny if possible.

Thanks for looking

[e30s50dan]

I will have a complete one from an 88is great motor auto tranny though but it hasn't been trashed. 2 old ladys owned before me pm me for more details

[broke30]

I have 2 complete eta drivetrains including harness/ecu/clutch, etc. Also have a 885 head from a euro 323i that you can mold with the eta bottom end. Anyways, all in Clemson, SC. Oh, and nice username, sorry already taken ;)
Max

[brokEe30]

I will have a complete one from an 88is great motor auto tranny though but it hasn't been trashed. 2 old ladys owned before me pm me for more details

I dont need the tranny after all. How much for the motor? Do you also have the ECU and harness?

I have 2 complete eta drivetrains including harness/ecu/clutch, etc. Also have a 885 head from a euro 323i that you can mold with the eta bottom end. Anyways, all in Clemson, SC. Oh, and nice username, sorry already taken ;)
Max

Nice Username...LOL Give me a price with the 885 head.

Also for both of these. Have you had these motors in running cars? What kind of mileage?

[brokEe30]

Would also consider an M42 possibly..

[rThor432]

I've got a recently rebuilt M20B25i motor at the shop. I pulled it from a wrecked car that I parted out a couple of years ago. The engine supposedly had ~2,500 miles on it when the guy's daughter stuffed it into something hard enough to kink the drivers frame rail. It still has the harness and all sensors attached other than the crank position sensor (might be there but I don't think so..). I've should have the flywheel/clutch/pp assembly around somewhere along with the DME to match the engine. I've got a transmission that I pulled from a boneyard that has been resprayed (indicating possible rebuild) but I'm not positive of it's condition. Let me know if you are interested in any of it.. The shop is located in Stallings/Matthews near the intersection of 485 and 74.

[Dominic49]

i have a m42 chilling in my garage 200 come get it :D

[brokEe30]

I've got a recently rebuilt M20B25i motor at the shop. I pulled it from a wrecked car that I parted out a couple of years ago. The engine supposedly had ~2,500 miles on it when the guy's daughter stuffed it into something hard enough to kink the drivers frame rail. It still has the harness and all sensors attached other than the crank position sensor (might be there but I don't think so..). I've should have the flywheel/clutch/pp assembly around somewhere along with the DME to match the engine. I've got a transmission that I pulled from a boneyard that has been resprayed (indicating possible rebuild) but I'm not positive of it's condition. Let me know if you are interested in any of it.. The shop is located in Stallings/Matthews near the intersection of 485 and 74.

How much for motor, harness, ECU and associated sensors. I dont need the tranny as I have one from a e21 323. PM me if that is easier.

i have a m42 chilling in my garage 200 come get it :D

Mileage, condition, and is it complete with ecu and harness and sensors?

[broke30]

I dont need the tranny after all. How much for the motor? Do you also have the ECU and harness?



Nice Username...LOL Give me a price with the 885 head.

Also for both of these. Have you had these motors in running cars? What kind of mileage?

Pm'd
Max

[Dominic49]

How much for motor, harness, ECU and associated sensors. I dont need the tranny as I have one from a e21 323. PM me if that is easier.



Mileage, condition, and is it complete with ecu and harness and sensors?

yes its complete milage around 140k dont rember exactly leaked a little oil ran great. pulled out a month after the car was purchased for an m50 swap.