WTB: All g260 mounting hardware

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • craiggroves91
    No R3VLimiter
    • Oct 2009
    • 3024
    #1

    WTB: All g260 mounting hardware

    I am looking for all the hardware to mount a G260 to a m20.

    I'd prefer not to buy new and pay ridiculous prices.

    thanks
    -Craig
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    1989 BMW 325i SOLD
    1998 BMW Estoril Blue e36 M3/4/5 SOLD
    1987 BMW 325 (The Piece) SOLD
    1991 BMW 318is S52 swap (The Beast) Now Driving Project Thread: http://www.r3vlimited.com/board/showthread.php?t=234207
    Tags: None
    • wodcutr
      R3VLimited
      • Apr 2009
      • 2193
      #2
      Are you looking for the torx bolts, pan piece, and mounting bracket?
      The difference between porcupines and BMWs is that porcupines have the pricks on the outside!

        Comment

        • craiggroves91
          No R3VLimiter
          • Oct 2009
          • 3024
          #3
          Originally posted by wodcutr
          Are you looking for the torx bolts, pan piece, and mounting bracket?
          I believe I'm looking for just the torx bolts.

          What is the pan piece?
          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

          1989 BMW 325i SOLD
          1998 BMW Estoril Blue e36 M3/4/5 SOLD
          1987 BMW 325 (The Piece) SOLD
          1991 BMW 318is S52 swap (The Beast) Now Driving Project Thread: http://www.r3vlimited.com/board/showthread.php?t=234207

            Comment

            • wodcutr
              R3VLimited
              • Apr 2009
              • 2193
              #4
              I think I may have all the bolts, but I will have to see if I can find them. The pan piece is the bottom of the bellhousing that covers some of the oil pan. I believe 4 small torx bolts go into it to help support the tranny.
              The difference between porcupines and BMWs is that porcupines have the pricks on the outside!

                Comment

                • craiggroves91
                  No R3VLimiter
                  • Oct 2009
                  • 3024
                  #5
                  Originally posted by wodcutr
                  I think I may have all the bolts, but I will have to see if I can find them. The pan piece is the bottom of the bellhousing that covers some of the oil pan. I believe 4 small torx bolts go into it to help support the tranny.
                  Awesome! Take a look. I really dont want to fight taking them off at pick n pull or buying new haha

                  Are you talking about #30 in this?
                  I don't have that. Maybe I should check out a buddy's m20 car and see what I'm missing
                  http://realoem.com/bmw/showparts.do?...19&hg=11&fg=10
                  Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                  1989 BMW 325i SOLD
                  1998 BMW Estoril Blue e36 M3/4/5 SOLD
                  1987 BMW 325 (The Piece) SOLD
                  1991 BMW 318is S52 swap (The Beast) Now Driving Project Thread: http://www.r3vlimited.com/board/showthread.php?t=234207

                    Comment

                    • wodcutr
                      R3VLimited
                      • Apr 2009
                      • 2193
                      #6
                      Yes #30. I have it, the four torx bolts for it and the four hex bolts as well to mount that. Also have the main tranny mounting bolts as well...2 m12x45 and 2 m12x75. I do not have the starter torx bolts or the nuts. You probably need the metal shield plate as well to keep the dirt out and the 10mm hex bolt that holds it to the tranny. I think I have this as well if you need. LMK!
                      The difference between porcupines and BMWs is that porcupines have the pricks on the outside!

                        Comment

                        • craiggroves91
                          No R3VLimiter
                          • Oct 2009
                          • 3024
                          #7
                          Originally posted by wodcutr
                          Yes #30. I have it, the four torx bolts for it and the four hex bolts as well to mount that. Also have the main tranny mounting bolts as well...2 m12x45 and 2 m12x75. I do not have the starter torx bolts or the nuts. You probably need the metal shield plate as well to keep the dirt out and the 10mm hex bolt that holds it to the tranny. I think I have this as well if you need. LMK!
                          The shield you mention is #17 in this right?
                          I believe I have the starter hardware.

                          I mainly just need the trans mounting bolts and it looks like I need #30 too.
                          PM if you want and we can go from there! thanks
                          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                          1989 BMW 325i SOLD
                          1998 BMW Estoril Blue e36 M3/4/5 SOLD
                          1987 BMW 325 (The Piece) SOLD
                          1991 BMW 318is S52 swap (The Beast) Now Driving Project Thread: http://www.r3vlimited.com/board/showthread.php?t=234207

                            Comment

                            Previous template Next
                            Working...