WTB: Rear Manual Transmission Output Flange

[JinormusJ]

I need the rear manual transmission output flange that connects the transmission to the flexplate (giubo) and ultimately the driveshaft

Its a three pronged flange; the transmission I have does not have one and it is the last thing I need for my 5-speed swap.

Part number:
23211228298

Looks like this:

(photo credit of Pelican Parts)

I need it for an 87 325e Getrag 260; this is a late model Getrag 260 and it needs the small diameter output flange (78mm)
There are two sizes, 83-86 use the large diameter anything after 86 is late and requires the small diameter


Let me know!

[andrew240z]

Be sure when you install that flange you follow the torque sequence in the manual. If you just bang it on with an air gun you will destroy the transmission

[rede30]

bump, i've got a stake in this one.

[JinormusJ]

Be sure when you install that flange you follow the torque sequence in the manual. If you just bang it on with an air gun you will destroy the transmission

I think that's what happened to the transmission we tried to take the flange off from. The nut wouldn't come off for nothing no matter how hard we tried to get it off

[JinormusJ]

Bump

[JinormusJ]

Bump

[JinormusJ]

Chest day bump