WTB: Head, Head parts, Cam, Rockers, Valves

[amdspitfire]

Looking for a m20b25 head.

Let me know what you have :)

Thanks

[mrsleeve]

I have a compleat head that is frozen up so it will need to be taken apart an have new rocker shafts put in, an take out the cam an reinstall.

100 bucks plus the shipping

[amdspitfire]

I have a compleat head that is frozen up so it will need to be taken apart an have new rocker shafts put in, an take out the cam an reinstall.

100 bucks plus the shipping

Why did it freeze up? Rockers/valves are good? Cam is good? Not warped?

[86espowa]

I have all the seperate parts ready for shipping, valves, rockers, springs, cam and rocker shafts, everything inside the head, minus the head itself.

PM me

[87-325ic]

i have a complete m20 head, what are you willing to pay? its in working order, maybe a little oily..

[mrsleeve]

Why did it freeze up? Rockers/valves are good? Cam is good? Not warped?

I got it that way. I happens when you pull a head an it sits out in the open for a long time. The oil drains out of the cam berrings an lets a bit of humid air in an a small amount of rus sticks form on the outter edges of each berring an glues the cam to the cam carrier. Once you get the rockers out just knock the cam out hit the berring lobes with a supper fine emery paper to get the rust spots off an reinstall every thing with a good assembly lube an all will be well. I have done it twice.

As far as I know its all good I bought to rebuild for my turbo motor but just never got around to an now I am going to be moveing soon so I have lots of stuff I need to get rid of.

[AjRose]

I have a complete m20 head also I'll sell for $250 plus shipping

[amdspitfire]

i have a complete m20 head, what are you willing to pay? its in working order, maybe a little oily..

Mileage, maintenance history, why was it pulled?

I got it that way. I happens when you pull a head an it sits out in the open for a long time. The oil drains out of the cam berrings an lets a bit of humid air in an a small amount of rus sticks form on the outter edges of each berring an glues the cam to the cam carrier. Once you get the rockers out just knock the cam out hit the berring lobes with a supper fine emery paper to get the rust spots off an reinstall every thing with a good assembly lube an all will be well. I have done it twice.

As far as I know its all good I bought to rebuild for my turbo motor but just never got around to an now I am going to be moveing soon so I have lots of stuff I need to get rid of.

Can you send me some detailed pics? PM me for e-mail.

I have a complete m20 head also I'll sell for $250 plus shipping

Mileage, maintenance history, why was it pulled?

[amdspitfire]

bump for some head ;)

[ColdAccord]

i got some great head from this chick once

oh i have an m20 head too

[amdspitfire]

i got some great head from this chick once

oh i have an m20 head too

let me know if shes in CA ;)

[amdspitfire]

bump

[alex]

I got a couple of bare heads with valves, few boxes of rockers and hardware.

What exactly do you need and what are you going to do with it? (i.e. rebild, slapp it on and drive etc)

[ejnight]

i have a complete m20 head, what are you willing to pay?