Not sure how many people here will be able to use these, but I figured it woudn't hurt to post them here. Not many sets of these around and this is the only set I've seen in this size/offset
They are 17x8.5 ET11 and 17x10.5ET27. The wheels themselves are in near perfect condition, there might be one or two small nicks total. The wheels are 5x108 67.1 cb, so they would bolt onto Ferrari's, I believe this set was specifically made for 512's because the offsets are apparently a little low for a 308. The wheels will include wheel adapters to BMW bolt pattern though, the adapters were purchased from Adapt-it usa and are very nice. With the adapters, the final offsets are ET-9 and ET7, they will fit nicely on any e24/e28/e34 but will need a slight fender roll in the rear if your car is low. I mounted the first set of tires on these wheels 8 months ago, so even though they were produced in the early 90's, they are basically brand new wheels. They do not disappoint, they're beautiful! They do come with center caps, but the threads need to be milled down ~5mm because the hex caps are the shorter, more desirable 1/2 height caps. No tires included!
Run these with the adapters on your 5/6/7/e30 m3 or re-drill them and they'd be perfect offsets for an e36
$1500
They are 17x8.5 ET11 and 17x10.5ET27. The wheels themselves are in near perfect condition, there might be one or two small nicks total. The wheels are 5x108 67.1 cb, so they would bolt onto Ferrari's, I believe this set was specifically made for 512's because the offsets are apparently a little low for a 308. The wheels will include wheel adapters to BMW bolt pattern though, the adapters were purchased from Adapt-it usa and are very nice. With the adapters, the final offsets are ET-9 and ET7, they will fit nicely on any e24/e28/e34 but will need a slight fender roll in the rear if your car is low. I mounted the first set of tires on these wheels 8 months ago, so even though they were produced in the early 90's, they are basically brand new wheels. They do not disappoint, they're beautiful! They do come with center caps, but the threads need to be milled down ~5mm because the hex caps are the shorter, more desirable 1/2 height caps. No tires included!
Run these with the adapters on your 5/6/7/e30 m3 or re-drill them and they'd be perfect offsets for an e36
$1500
:up:
Comment