Bbs rs

[pineapplegti]

Yet another set..Fun offsets for a low e30..
Sold.. thanks R3V custom hubrings.(I can point you in the direction to get them redrilled on your own :)..
RS014 9 x 16 11.0 130.00 5 71.6 Porsche 911,930,944 bis 8/86 ET 11
RS056 8 x 16 28.0 130.00 5 71.6 Porsche 911,930,944 ET 28







Located in Sunny Barstow ca..Trades always considered.

[pineapplegti]

rear backpads... fronts are flat.
My shop can make these flat as well when redrilling

[IminDiegoTriick]

fuck. i want.

[image]

rear backpads... fronts are flat.
My shop can make these flat as well when redrilling

I do not think it's a good idea.

[pineapplegti]

Done it before.. depends on the depth of the face. worked fine for 50k on my last set

[pineapplegti]

up

[pineapplegti]

:)

[Cha Ching]

Can you send me a PM on where to get these wheels filled & re-drilled? Thanks, GLWS!

[vespam5]

Don't redrill these, see those features on the back side of the wheels? Not re-drillable if you care anything about doing things right. If anything perhaps a set of adaptors but with low offsets like these your options are limited.

[pineapplegti]

Not sure how many wheels you have had redrilled.. or milled or filled milled and redrilled . Ive done it many times... it works fine

[Cha Ching]

Not sure how many wheels you have had redrilled.. or milled or filled milled and redrilled . Ive done it many times... it works fine

Aron, Motorsport Tech did all the milling & drilling work, right? They think it's perfectly acceptable to do so?

[chrisbmx68]

I can vouch for pineapplegti and his claims about these wheels. It should be perfectly safe, and if the center isn't thick enough to simply turn the raised areas flat the gaps can be welded up then the whole mounting pad resurfaced.