WTT: BBS RS 5x120 16" centers for 4x100

[gnarlycreature]

Located in NJ.
As the title says!
I have four 34 hole centers.
2 (two) 16" BBS RS 005 5x120 et11 from a 7" wheel
and
2 (two) 16" BBS RS 061 5x120 et20 from an 8" wheel

I am looking for 4 ( four) 16" 4x100 centers!

[pwagon717]

you going to have to have either 30 hole barrels, or fine some redrills

[hexagone]

you going to have to have either 30 hole barrels, or fine some redrills

or someone crazy enough to trade anything for 4x100. This is an impossible trade, unless a good bit of cash is involved on top

[gnarlycreature]

or someone crazy enough to trade anything for 4x100. This is an impossible trade, unless a good bit of cash is involved on top

e28 guysssss perhaps? I will involve CASH.
I don't really want to ruin the wheels and have them filled/drilled.

[image]

I don't know no one RS modell who has 4x100 and 16 (34 hole) centers originally. Maybe they exist....

[Stephen]

e28 guysssss perhaps? I will involve CASH.
I don't really want to ruin the wheels and have them filled/drilled.

its impossible because 34 hole and 4x100 rs don't exist.

[Todd Black 88]

Sell the complete wheels and buy 4x100 set?

[gnarlycreature]

its impossible because 34 hole and 4x100 rs don't exist.

Oh mannnnn :(

Suspension swap of fill and drill I guess.

[pwagon717]

Just get them filled and redrill, it would run you about $250 for the work not including shipping. Open up a whole market for the wheels again

[e46s54dr]

Just get them filled and redrill, it would run you about $250 for the work not including shipping. Open up a whole market for the wheels again

It might run a little bit more since the bbs rs005s are scalloped backs though. They would need to weld in the voids and holes then machine the back pads flat before they can redrill it. The rs061s are flat backs so the fill and redrill job would be pretty basic.

[pwagon717]

Not really, Motorsport tech quoted $200 for the fill and drill on a set of 211 I have with the scalloped back. But I am not going to clutter his thread.

[gnarlycreature]

Not really, Motorsport tech quoted $200 for the fill and drill on a set of 211 I have with the scalloped back. But I am not going to clutter his thread.

That's not clutter! That's a great help.