Speedline 7.5" x 16" alloys set of 4, 5x120 $150

[oh2fly]

These 7 1/2" by 16" aftermarket alloy wheels fit the BMW e30 M3, are made by Speedline .They were made in 1992/93. They have all been spun tested on my custom stand. One is perfectly round and straight. The other three have flat spots on the lips and will need to be straightened, to be perfectly true. Typically this costs about $75 per wheel..There is some scuffing and minor curbing areas, as shown in pics. The offset is 18mm and each weighs 21.5 lbs. I have no center caps, sorry. These will also fit early 3.0CS coupes, Bavarias, 5, 6 and 7 series models. I will ship them in 4) 18x18x10 boxes, weighing 23 lbs. each. I have lots of pics, if serious.

[MikeDE]

These will also fit early 3.0CS coupes, Bavarias, 5, 6 and 7 series models.

So the centerbore is 72.5mm??

[oh2fly]

Mike, I just measured one with my telescopic gauge and digital caliper. 72.51 mm. Good question

[MikeDE]

Yeah, I am having to restrain myself. I may be into an E34 in the near future.

[Galactodactyl]

Yeah, I am having to restrain myself. I may be into an E34 in the near future.

These wheels would like crazy good on an e34. :oops:

[Mtriple]

I bought a set of these new back in 92 for my CRX. I believe they are called the "Mistral" if I remember correctly. Beautiful wheels, I'm having a hard time not pulling the trigger on these...

[oh2fly]

Wheels are now up on the bay

http://www.ebay.com/itm/140700513213?_trksid=p3984.m1555.l2649&item=140700513213&viewitem=&sspagename=STRK:MESELX:IT&vxp=mtr

[oh2fly]

Bump, 2 days left