Looking to get $1950 for these wheels. Wheels are similar to BBS RS in design.
The wheels are made by ACT. Specs are 17x8.5 ET+12 for all 4 wheels.
There is minor curb rash on two of the wheels and a slight bend in one of them. The locks on one of the center caps was damaged and removed, but the center cap is still useable even without it.
Here's a picture I tried taking of the bend, boxed in red. Don't mind the water spots, I didn't have much time to polish the lips back up, after I took them off of my car:
Some pictures I had of it on my car at the time:
Pictures of it on an E34 540i:
Here is a more recent picture of one of the wheels that I quickly cleaned up and polished the lips a bit (note the center cap was dirty in this picture)
Showing lip size:
Picture showing backspacing (Note: It reads 5.125, but there is a .125 gap at the beginning of the ruler before the numbers start, so actual measurement is 5.25" backspacing)
Center cap tool:
All 4 center caps are included.
I am located in Irvine, CA. Let me know if any of you are interested or if you had any questions.
thanks.
-Don
donathon@gmail.com
The wheels are made by ACT. Specs are 17x8.5 ET+12 for all 4 wheels.
There is minor curb rash on two of the wheels and a slight bend in one of them. The locks on one of the center caps was damaged and removed, but the center cap is still useable even without it.
Here's a picture I tried taking of the bend, boxed in red. Don't mind the water spots, I didn't have much time to polish the lips back up, after I took them off of my car:
Some pictures I had of it on my car at the time:
Pictures of it on an E34 540i:
Here is a more recent picture of one of the wheels that I quickly cleaned up and polished the lips a bit (note the center cap was dirty in this picture)
Showing lip size:
Picture showing backspacing (Note: It reads 5.125, but there is a .125 gap at the beginning of the ruler before the numbers start, so actual measurement is 5.25" backspacing)
Center cap tool:
All 4 center caps are included.
I am located in Irvine, CA. Let me know if any of you are interested or if you had any questions.
thanks.
-Don
donathon@gmail.com
Comment