FS: Azev A 16x7.5 ET20 / 16x9 ET15 4x100 wheels only

[achtunge30]

bump, spend some holiday money on some nice wheels!

[achtunge30]

HNY bump - tax and show season just around the corner!!

[achtunge30]

bump

[achtunge30]

bump

[achtunge30]

bump

[achtunge30]

bump

[achtunge30]

bump

[Zoolander090]

Are the 9" a direct fit or do I have to do any rolling, etc? Where are you located?

[achtunge30]

Depends on your tire size and suspension set up. With coils 1/2 way down and no fender gap with 215/45/16 it rubs on big dips for me but I haven't rolled fenders yet. 205/40 or 205/45 and hr sports may be a diff story...

[Zoolander090]

My car is all stock, not lowered rolled etc. I'm looking for a direct fit without mods. I'd think that 9" wide on 16" rim would be a little to wide/big.

[achtunge30]

My car is all stock, not lowered rolled etc. I'm looking for a direct fit without mods. I'd think that 9" wide on 16" rim would be a little to wide/big.

You might be somewhat confused...
I only rubbed because my car is very low and again, this only happened on severe dips and because i'm running an aggressive tire width (215 instead of 205).

These will bolt up to your stock suspension BMW no problem, no mods, no fender rolling required. If you are on complete factory stock suspension, it should not rub at all. Now if your stock suspension is worn or you have blown shocks (ie: no dampening whatsoeve or sagging springs), then its likely you may rub.

Tire size is a factor also. Do your research, PM Mystikal as he is a very good resource for figuring out proper tires sizes. Many people on r3v run 16x9" wheels, what dictates rubbing is your suspension mods and tire size.

Do some research and let me know if you decide you want them.

[achtunge30]

bump

[achtunge30]

bump

[GT BMW E30]

Nice wheels need a new home. If I had another E30 I would mount them asap. I love the staggered look.

[achtunge30]

bump