$1500 SHIPPED
Square set with flat backs, 15" diameter 20-Hole pieces, 2" lips, 5" barrels, PDC of 4x98, ET12 (overall width of 8.5" giving zero offset at 4.25", back spacing is 4.5" giving giving an overall ET of 0.25" or 6.3mm), center bore is 58.1mm), actual wheel widths are 7.5". I have all 4 center rings with the original bolts to screw them to the centers but one ring does only have 2 bolts but the other 3 rings do all have 3 bolts. I also have the 4 original center caps however they're junk. Center caps can still be purchased directly from HRE for $75 each. Barrels are true with no cracks. Lips are also straight, three are near mint with only a few small imperfections from storage and rocks and what not from general use. These lips would cleanup perfectly with minimal effort.
Rims have been split. Lips were washed and given a quick polish.
***Reverse mount specs are 15x7 ET16***
erik1held@gmail.com
Square set with flat backs, 15" diameter 20-Hole pieces, 2" lips, 5" barrels, PDC of 4x98, ET12 (overall width of 8.5" giving zero offset at 4.25", back spacing is 4.5" giving giving an overall ET of 0.25" or 6.3mm), center bore is 58.1mm), actual wheel widths are 7.5". I have all 4 center rings with the original bolts to screw them to the centers but one ring does only have 2 bolts but the other 3 rings do all have 3 bolts. I also have the 4 original center caps however they're junk. Center caps can still be purchased directly from HRE for $75 each. Barrels are true with no cracks. Lips are also straight, three are near mint with only a few small imperfections from storage and rocks and what not from general use. These lips would cleanup perfectly with minimal effort.
Rims have been split. Lips were washed and given a quick polish.
***Reverse mount specs are 15x7 ET16***
erik1held@gmail.com
Comment