FS: 17x8 BBS Style 5 - 4x100

[VicSkimmr]

I've got a set of mint Style 5s for sale. 17x8 et 20, filled and re-drilled to 4x100. Centers are professionally refinished in BMW silver, lips are hand polished. You've got 2 choices for center caps, authentic polished BBS caps or vintage BMW caps. $1,600 obo + shipping. Located in Murrells Inlet, SC. Tires not included.


The set by jasonwithers, on Flickr

Detail by jasonwithers, on Flickr


Wheel 1 by jasonwithers, on Flickr


Wheel 2 by jasonwithers, on Flickr


Wheel 3 by jasonwithers, on Flickr


Wheel 4 by jasonwithers, on Flickr

Closeups

Wheel 1 by jasonwithers, on Flickr


Wheel 2 by jasonwithers, on Flickr


Wheel 3 by jasonwithers, on Flickr


Wheel 4 by jasonwithers, on Flickr

Some very minor imperfections in the lips. These wheels are all straight, no cracks or bends. I had them looked over by a professional. We had one small bend repaired and they're good to go.

Lip Imperfection by jasonwithers, on Flickr


Lip Imperfection by jasonwithers, on Flickr

[chuck90m3]

How about the center hub? Are they hub centric for the e30? If so what will it take to ship these to 75229?

[VicSkimmr]

These were originally off an e39 so center bore should be 74.1mm but a decent set of hub centric rings only run about $10-$20. I have a set but they're 74.1 --> 56.1 so they won't quite work in this application unfortunately.

UPS estimates they would be about $100 give or take to ship them to you :)

[chuck90m3]

So did you run these on an E30? If so other than the hub centric rings did you have any clearance or rubbing issues? What size tires did you run?

[cactusjacks1]

How about a pic of the back of the wheel? Want to see how the fill & drill came thru.

Thanks,
Jack

[VicSkimmr]

So did you run these on an E30? If so other than the hub centric rings did you have any clearance or rubbing issues? What size tires did you run?

Unfortunately no, these were meant for my wife's MINI Cooper but the offset was too aggressive for her. 17x8 et 20 is a pretty conservative fitment for e30s isn't it? I was running 16x8 et 23 with 8mm spacers on mine and it wasn't aggressive at all but I no longer have it so I can't test fit them :(

IMG_9541 by jasonwithers, on Flickr

How about a pic of the back of the wheel? Want to see how the fill & drill came thru.

Thanks,
Jack

Good idea, I'll go take one today :)

[VicSkimmr]

Did some googling, I found a few e30s running them

http://www.r3vlimited.com/board/showthread.php?t=93781

[chuck90m3]

I'll do $1500 shipped with both sets of emblems.

[VicSkimmr]

I'll do $1500 shipped with both sets of emblems.

YGPM

I forgot to take a pic of the backs of the wheels yesterday but I'll try to remember again today.

[VicSkimmr]

Wheel backs:

Wheel 1 - Back by jasonwithers, on Flickr


Wheel 2 - Back by jasonwithers, on Flickr


Wheel 3 - Back by jasonwithers, on Flickr


Wheel 4 - Back by jasonwithers, on Flickr


That shine though

Detail by jasonwithers, on Flickr

[chuck90m3]

Ready to get these on my E30

[cactusjacks1]

Wheel backs:

Wheel 1 - Back by jasonwithers, on Flickr

Thanks!
How thick is the plate you put on the back? Did you weld it on? Did it effect the offset?

Thanks,

Jack

[Cha Ching]

Beautiful Style 5's VicSkimmer, who did the fill and drill? I'm looking to get mine done right.

[VicSkimmr]

Thanks!
How thick is the plate you put on the back? Did you weld it on? Did it effect the offset?

Thanks,

Jack

There's no plate. The original holes were welded shut and new holes were drilled. The offset hasn't changed.

Beautiful Style 5's VicSkimmer, who did the fill and drill? I'm looking to get mine done right.

Unfortunately I don't know. I bought these as a project for my wife's MINI and they came already re-drilled. I'm pretty sure Rotiform will do it for you if you don't have anyone local.

These are pending sale, I have to repolish the outer edges because the tire shop I took them to scruffed the lips up but they've been spoken for.

[chuck90m3]

They've been spoken for.

Yes they are. Ready to get these wheels!