HRE 504 16x7.5/8 + 18mm adaptec adapters

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nyChris
    Grease Monkey
    • Apr 2012
    • 395

    #1

    HRE 504 16x7.5/8 + 18mm adaptec adapters



    Up for sale is a staggered set of vintage US spec HRE 504 wheels. Could definitely use a refinish job, but I ran them all last season as is. I liked the patina, it fit my car. Looks good from 10 feet away, but up close you will notice imperfections.

    Hex caps, and stickers are toast. New billet hex caps,and stickers are still available from HRE for $75.

    There are also a few small imperfections on the lips, and one is slightly out of round. Nothing that couldn't be fixed. Wheels balanced perfectly as is, and cause no vibrations at any speed. I have posted pictures of the notable imperfections below.

    Wheel Specs:
    2x 16x7.5 et 36 (et18 with adapters) - 2in lip + 5.5in barrel
    2x 16x8 et43 (et25 with adapters) - 2in lip + 6in barrel

    It is also worth noting that the 7.5 inch wheels cleared my rx-7 bbk. No grinding of the caliper required.

    I am selling the wheels as a package with 18mm 4x100 to 5x114.3 adaptec adapters. They have approximately 2100 miles on them. Tires are not included. They are shot. I will have them dismounted before shipping.



    Looking for $1000 shipped for wheels + adapters.

    Best way to reach me is via PM.

    On my e30


    I didn't really clean the wheels before the pics. There is some snow on the lips from rolling them out of the shed to take pics.

    Wheel #1


    Wheel #2


    Wheel #3


    Wheel #4




    Imperfections:













    Last edited by nyChris; 01-27-2015, 08:40 AM. Reason: added lip/barrel sizes
  • Zinno_e30
    E30 Addict
    • Jul 2010
    • 553

    #2
    This is a great deal!

    Comment

    • ChE_UND_09
      Wrencher
      • Jan 2012
      • 220

      #3
      Is it me or are the centers cracking where the two bolts are shown in the last picture?

      Comment

      • mbonder
        R3VLimited
        • Feb 2004
        • 2255

        #4
        Just looks like water marks from the corrosion dripping out of the bolt holes

        Comment

        • nyChris
          Grease Monkey
          • Apr 2012
          • 395

          #5
          Originally posted by ChE_UND_09
          Is it me or are the centers cracking where the two bolts are shown in the last picture?
          Originally posted by mbonder
          Just looks like water marks from the corrosion dripping out of the bolt holes
          There are no cracks anywhere on these wheels. mbonder is correct.

          Comment

          • ethurtee
            E30 Mastermind
            • Jan 2013
            • 1989

            #6
            Very very cool wheels! If these are still available after my suspension/exhaust work is done, I'll be in touch!

            GLWS

            Comment

            • nyChris
              Grease Monkey
              • Apr 2012
              • 395

              #7
              Originally posted by ethurtee
              Very very cool wheels! If these are still available after my suspension/exhaust work is done, I'll be in touch!

              GLWS
              Thanks. This is one of my favorite weave styles. The face mount design really sets them apart from the other similarly styled wheels.

              Comment

              • nyChris
                Grease Monkey
                • Apr 2012
                • 395

                #8
                bump

                Comment

                • pandaboo911
                  R3VLimited
                  • May 2010
                  • 2070

                  #9
                  Interested in separating the wheels? I don't need the adapters.

                  Comment

                  • 89DelphinE30
                    Wrencher
                    • Mar 2011
                    • 287

                    #10
                    Geez these are a deal. Wish you were local!

                    Comment

                    • nyChris
                      Grease Monkey
                      • Apr 2012
                      • 395

                      #11
                      If I sell the wheels separate I'd be looking for $800 +shipping

                      Comment

                      • lowerstandards
                        Noobie
                        • Oct 2013
                        • 30

                        #12
                        any more pictures of them on your car?
                        1991 Alpine White 318i M52 Swapped

                        Comment

                        • nyChris
                          Grease Monkey
                          • Apr 2012
                          • 395

                          #13
                          Some shitty blurry pics:


                          Comment

                          • nyChris
                            Grease Monkey
                            • Apr 2012
                            • 395

                            #14
                            bump

                            Comment

                            • lowerstandards
                              Noobie
                              • Oct 2013
                              • 30

                              #15
                              if i can sell my wheels quick enough, ill grab them
                              1991 Alpine White 318i M52 Swapped

                              Comment

                              Working...