SOLD: BBS RS true 4x100

[Bulliongold]

Clean set of BBS RS 3 piece wheels true 4x100 bolt pattern not filled and redrilled no bends or cracks 15x8 15x9 195/45 Toyo proxes have about 90% tread. Price is $2500 Location is Los Angeles local pick up preferred, thanks.

[JustAGuy]

Cool wheels, but I believe you have your measurements confused.

Good luck.

*Edit - unless you added wider lips, which it would seem you probably did!

[wilholl]

All ET25 ???

[Bulliongold]

Cool wheels, but I believe you have your measurements confused.

Good luck.

*Edit - unless you added wider lips, which it would seem you probably did!

Yes the wheels were re-lipped

[Bulliongold]

All ET25 ???

Wheels were re-lipped not sure what the offset is perfect fitment for e30s

[lowrider]

If you keep the original RS001 barrels, offsets should be as follows:

front: 8j, et ~ 12 (2j lip + 0.5j center + 5.5j barrel)
rear: 9j, et ~ 0 (3j lip + 0.5j center + 5.5j barrel)

[JustAGuy]

The one picture of the center shows a stamp of et25.

[Wschnitz]

The one picture of the center shows a stamp of et25.

But obviously its not Et25 with the changed lips :P

[Bulliongold]

If you keep the original RS001 barrels, offsets should be as follows:

front: 8j, et ~ 12 (2j lip + 0.5j center + 5.5j barrel)
rear: 9j, et ~ 0 (3j lip + 0.5j center + 5.5j barrel)

Not sure if the barrels were changed :(

[Wschnitz]

Im almost 100% those barrels have been changed, most RS001s came in 15x7 ET25

[JustAGuy]

But obviously its not Et25 with the changed lips :P

The lips have nothing to do with offset. Only the barrel would make a difference.

[wilholl]

since they are not mounted, measuring the backspacing (ET) should be very easy.

[lowrider]

The lips have nothing to do with offset. Only the barrel would make a difference.

You mean backspace, not offset ;)

[wilholl]

since they are not mounted, measuring the backspacing (ET) should be very easy.

You mean backspace, not offset ;)

Once the backspace is measured the offset is easy to calculate

[JustAGuy]

You mean backspace, not offset ;)

Yeah, you're right! Sorry.