Done.

[KIRIEIW]

No longer needed at the moment


I need new tires and after having Euroweave's for 2 years, its time for an upgrade. Also, please don't PM me about my Euroweaves, there not for sale until I find a set of replacement wheels for my car.


Looking for a set of 4x BBS RS 4x100 16" wheels. Only looking for RS003, In other words it needs to be a true 4x100, not fill and re-drilled. I also highly prefer them never being disassembled, with minimal curb rash (stock lips, barrels, centers) they can need some love. NO BENDS! Gold, silver, I'll take them. Must have center caps, or know someone selling some. The "BBS" logo can be faded.

**Need to be stock 16x7 square set up


Willing to spend up to $2,000 for the right set of wheels.

[KIRIEIW]

I'm thinking this is going to be a hard find.. No one ever sells these

[getouth]

I have some 189s that can be built into 003's for about half your budget. PM me if interested in going that route??? They fit your description. Except they are 15".

[KIRIEIW]

Going that route I'd need to pick up a set of 16's in any bolt pattern, and basically transfer your centers to those wheels right? I always assumed the centers on 15" RS's where smaller then 16" centers and it wasn't possible. I also want to say I've seen people step up the lip and reuse the barrel and center, I don't really like that idea however.

[floridabmx]

15" RS Centers are 30 hole, and 16" RS are 34 hole.

16" RS Parts will not work on a 15" center unless you use parts from a 003.

The RS003 is unique being that it uses a 30 hole center, and double stepped parts to make it 16"

You can find some 15" centers and order custom halves or use OZ Vega halves to make them 16"

If going that route, your best bet is to find some rs001 as they have the same specs as the 003, the rs001 uses 15" parts instead.

The rs001 and rs003 uses 1" lips and 5.5" barrels.

FWIW, the waffle lug covers on a 003 are a very rare thick casted design, unlike stamped metal like most other RS.

GLWSearch

[KIRIEIW]

15" RS Centers are 30 hole, and 16" RS are 34 hole.

16" RS Parts will not work on a 15" center unless you use parts from a 003.

The RS003 is unique being that it uses a 30 hole center, and double stepped parts to make it 16"

You can find some 15" centers and order custom halves or use OZ Vega halves to make them 16"

If going that route, your best bet is to find some rs001 as they have the same specs as the 003, the rs001 uses 15" parts instead.

The rs001 and rs003 uses 1" lips and 5.5" barrels.

FWIW, the waffle lug covers on a 003 are a very rare thick casted design, unlike stamped metal like most other RS.

GLWSearch

This is the kind of response I needed. Thank You!

[KIRIEIW]

Ttt

[411]

Ttt

I have a pair of near new rs003

Can also sell you a set of 4 custom up sized 15"

[ThatOneEuroE30]

Well phreshkid was gonna have a set until he got scammed

[411]

What does that mean?

[KIRIEIW]

Well phreshkid was gonna have a set until he got scammed

+1 almost a little worry sum after reading that

[KIRIEIW]

Appreciate it 411, but I'd like a complete set rather then a pair.

[411]

+1 almost a little worry sum after reading that

.....what am I missing here?

[KIRIEIW]

.....what am I missing here?

Bam!

http://www.r3vlimited.com/board/showthread.php?t=366290

[ncsubowen]

Bam!

http://www.r3vlimited.com/board/showthread.php?t=366290

Thanks for the link, and for sending me down 45 minutes of rabbit hole.

That kid should be scared shitless of the internet brigade. Within 2 hours of posting here people were calling his father and had him nailed down.