SOLD
16x7 et19 (16lbs-6 oz per) WITH A 3" LIP
-16x8 et 8 (16lbs-14oz per) WITH A 4" LIP
They are light weight
-Rouge Engineering 12MM hubcentric spacers for the front (These have no lug bolts as I will be running a stud kit so I didnt buy them)
I bought these wheels from a Bimmerforums member off of ebay with the intentions to refinish them and use them on my project. However I just bought a set of BBS RS's so these must go.
Here are the problems:
Before I go to the list- I have had these on a balancing machine and they balance out perfect WITHOUT fixing anything! Infact the guy drove around like this for over 2 years he said.
(2) of them have very small nick bends in the lips.
(1) wheel has a flat spot in the lip
Neither of the problems caused vibrations at any speed from what I was told!
All (4) centers need to be sandblasted/powdercoated.
All (4) lips need to be re-polished (I started doing one. They will all be sanded down properly and just need a buffing wheel and some compoud taken to them. This takes time and I dont have it)
I received my BBS RF's in ALOT worse condition than these and they turned out alright
Price quotes-
$30 per wheel face to sandblast/powdercoat = $120
$20 per wheel lip to repolish them after I sanded them = $80
Use touch up paint on bolts after you put them back together and it will last for A LONG TIME = $3.95 (Black looks the best doing this)
I never got an estimate on taking out the small bends because I dont have a local place to do that.
Here are some pictures-
White stuff is just grime/dirt
Before sanding:
After sanding:
You can see here the grime on them before I sand it off
I try to be as descriptive as possible when selling something to be honest about its flaws. I have good feedback on Bimmerforums and Ebay. If you have questions, Please ask.
I am asking 650 + shipping OBO(Offers will be accepted, but I am pretty firm!!!!!)
James
16x7 et19 (16lbs-6 oz per) WITH A 3" LIP
-16x8 et 8 (16lbs-14oz per) WITH A 4" LIP
They are light weight
-Rouge Engineering 12MM hubcentric spacers for the front (These have no lug bolts as I will be running a stud kit so I didnt buy them)
I bought these wheels from a Bimmerforums member off of ebay with the intentions to refinish them and use them on my project. However I just bought a set of BBS RS's so these must go.
Here are the problems:
Before I go to the list- I have had these on a balancing machine and they balance out perfect WITHOUT fixing anything! Infact the guy drove around like this for over 2 years he said.
(2) of them have very small nick bends in the lips.
(1) wheel has a flat spot in the lip
Neither of the problems caused vibrations at any speed from what I was told!
All (4) centers need to be sandblasted/powdercoated.
All (4) lips need to be re-polished (I started doing one. They will all be sanded down properly and just need a buffing wheel and some compoud taken to them. This takes time and I dont have it)
I received my BBS RF's in ALOT worse condition than these and they turned out alright
Price quotes-
$30 per wheel face to sandblast/powdercoat = $120
$20 per wheel lip to repolish them after I sanded them = $80
Use touch up paint on bolts after you put them back together and it will last for A LONG TIME = $3.95 (Black looks the best doing this)
I never got an estimate on taking out the small bends because I dont have a local place to do that.
Here are some pictures-
White stuff is just grime/dirt
Before sanding:
After sanding:
You can see here the grime on them before I sand it off
I try to be as descriptive as possible when selling something to be honest about its flaws. I have good feedback on Bimmerforums and Ebay. If you have questions, Please ask.
I am asking 650 + shipping OBO(Offers will be accepted, but I am pretty firm!!!!!)
James
Comment