FS: Weaves, Borbets, and Kopis

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mbonder
    R3VLimited
    • Feb 2004
    • 2255

    #1

    FS: Weaves, Borbets, and Kopis

    I have three sets of wheels, two of which need to go, I'll keep whichever set is left. All prices do not include shipping from my address (07981) to yours. Pick up is always welcome and makes life easier!

    1. 14x6.5" basketweaves: $250


    Wheel #1

    Wheel #2

    Wheel #3

    Wheel #4


    They are all solid with no bends, wheels 3 and 4 have a bit of rash, but nothing terribly noticeable. All center caps included.

    2. Borbet Type C's 15x7": $400


    Wheel #1

    Wheel #2

    Wheel #3

    Wheel #4


    These are in excellent condition, only a few small rock chips and nicks. These were bought from RCWells about 4 years ago.

    3. Alpina kopis 17x7.5": $450

    Wheel #1

    Wheel #2

    Wheel #3

    Wheel #4


    For those of you who are observant you will notice that wheels 1 and 2 have bends in them (#1 is the worst off). On wheel #1 the bend is at the 4 o'clock position, on wheel #2 a smaller bend is located at the 7 o'clock position. Wheels come with all center caps and with almost new BFGoodrich G-Force Sports 215/45/17.

    These wheels have only been on the car for about 1500 miles. My father borrowed it and hit a pot hole with both the front and rear right wheels resulting in the bends in both. I have gotten an estimate of $115 per wheel to repair the damage. I paid $180 per wheel plus $85 per tire for these= $1060.

    I can have them repaired but the price will go up to around $750 if I do that, or you can have them as is and repair them yourself. Either way, 17" is just too small of a sidewall for a cabbie, so I'm going to 15".


    PM me with any questions. Payment is through paypal or by cash if you pick up.

    Matt
  • vlad
    Banned
    • Dec 2003
    • 0

    #2
    I am interested in 14x6.5" basketweaves, maybe I can come up Sun night and pick them up

    Comment

    • mbonder
      R3VLimited
      • Feb 2004
      • 2255

      #3
      No problem vlad, I'll be around, PM for contact info and address.

      Matt

      Comment

      • ZM Blue Devil
        Forum Sponsor
        • Dec 2006
        • 13836

        #4
        Bump for a good guy/seller.
        sigpic
        New website releasing soon www.gutenparts.com Guten Parts + Service | Facebook | Twitter
        ____________________________________

        Levent
        %20levent@gutenparts.com

        ____________________________________
        Ladies:
        1998 E36 m3/4/5 1988 325i 1989 325iT

        Comment

        Working...