FS Fikse Profile10 17x8 et?

[blunttech]

i have a set of fikse profil10's that fikse tells me are e30m3 fitment but i cannot confirm this. wheels came with tire pressure monitors and this is why i question what fikse tells me. they are all 17x8 and have a backspace of 5 5/8". 5x120
someone ran these in the winter one year so they need some attention. there is no actual pitting but rather oxidation i guess.the centers are nice and not oxidized or pitted in any way. i had planned on refinishing these but i have too many things going on and theyve been sitting for 3 weeks now.i would spin them with different grades of steel wool and some polishing compound and they would look great. Im happy to provide serial numbers for each wheel if you wanted to further investigate with fikse. they are light and strong at 16lbs each on my bathroom scale. these are nice wheels in decent condition that just need some attention. id like 1100.00 or best offer for them. unkorama at g mail .com

[VacMan]

Are you sure they're 17x8? If you do the math, you get the following:

8" wide = 203.2mm

Half of that (to get 0 offset) = 101.6mm

5.625" backspacing = 142.87mm

Offset = 142.87-101.6 = 41.14mm

Since they don't look like ET40 in the pics, I'm going to guess they're wider or the red car has an E36 5 lug swap with higher offsets. Nice wheels, btw. :)

[blunttech]

Are you sure they're 17x8? If you do the math, you get the following:

8" wide = 203.2mm

Half of that (to get 0 offset) = 101.6mm

5.625" backspacing = 142.87mm

Offset = 142.87-101.6 = 41.14mm

Since they don't look like ET40 in the pics, I'm going to guess they're wider or the red car has an E36 5 lug swap with higher offsets. Nice wheels, btw. :)

THANKS FOR THE MATH, YOU ARE SMARTER THAN I. ALSO, SORRY TO CONFUSE BUT THE SET ON THE RED E30 ARE THE SAME TYPE OF WHEEL BUT DIFFERENT FITMENT. IVE HAD A FEW SETS OF THESE. THESE ARE 17X8 FOR SURE. so from youre calculations these are 41et???

[blunttech]

Sold bitches