PM Sent
Announcement
Collapse
No announcement yet.
Dederic Motorsports Complete Bolt-on Turbo System
Collapse
X
-
Bump for update on the 24V kits? Curious if this kit, including a base tune, is ready for sale at this point? A couple of other questions...
1.What are the turbo specs assuming compression will be lowered with an MLS head gasket?
2. Ballpark whp goals?
3. Any chance of retaining A/C with the 24 valve kit?
Thanks guys
ZF320 | M50 Mani | TRM + 21.5lb Injectors + 3.5in MAF | E36 M3 Rack/Driveshaft | Megan Coilovers | 002R/452's
In the works: UUC Evo 3/DSSR, JB Racing lightweight Flywheel, Shrick cams, BBK (yet to be determined)
I NEED A WINGLESS AW TRUNK LID PLEASE PM ME IF YOU HAVE ONE!
Comment
-
Here's a big update for you guys.
m42 turbo kits are coming in June, $3250. Works with or without A/C. Complete kit to the downpipe, minus exhaust and headgasket. ms2 standalone.
24v NV turbo kits are also almost ready for production, $3450. The kits include everything you'll need to boost from the filter to the downpipe, minus the exhaust and a head gasket.
As for the exhaust, I can offer a $650 3" straight pipe, ss mandrel bend, tig welded. S/h is $75 to the lower 48. Muffler, Resonators, and Catalysts are extra. MLS gasket for m50 is $230 for normal thickness. I will be using Otis' manifolds. I do need a LOCAL guy who would like a turbo kit to contact me, I will do discounted installation on their m50nv e30 so I can get some pictures of the installation.
I am still testing the VANOS ecu's, and in the mean time I have a 413 chip tune that is good up to 14psi. I would advise to wait for the standalone, unless the chiptune is the route you want to take. They are the same price, vanos, non vanos, all starting at $3450 for non-A/C kits, and $3550 for A/C Retaining kits.
Note that the A/C kits for both m20 and m50 use a smaller aux fan. It also uses a smaller intercooler. The tubing is also a little more complicated, with a few more bends.
Please PM me for options, every turbo kit is built to order. I can add or subtract parts and you deem necessary. Core fees extra.
Derek
DedericMS
Comment
-
Great update and thanks for all the info. I re-read the thread and got plenty of answers to some of my noobie questions. Looking forward to the release of the 24V kitsLast edited by johnjohnsons54; 04-26-2012, 01:41 AM.
ZF320 | M50 Mani | TRM + 21.5lb Injectors + 3.5in MAF | E36 M3 Rack/Driveshaft | Megan Coilovers | 002R/452's
In the works: UUC Evo 3/DSSR, JB Racing lightweight Flywheel, Shrick cams, BBK (yet to be determined)
I NEED A WINGLESS AW TRUNK LID PLEASE PM ME IF YOU HAVE ONE!
Comment
-
Originally posted by blueapplesoda View PostI do need a LOCAL guy who would like a turbo kit to contact me, I will do discounted installation on their m50nv e30 so I can get some pictures of the installation.
DedericMS
Comment
-
Just saw you mentioned throwing boost at a M10B20. I may have to contact you after I get my '02 road worthy.
Ich gehöre nicht zur Baader-Meinhof Gruppe
Originally posted by Top GearJust imagine waking up and remembering you're Mexican.
Every time you buy a car with DSC/ESC, Jesus kills a baby seal. With a kitten.
Comment
-
OBD2 tuning as of right now is only standalone PNP, no "chip tunes".
And a few pics from the m10b20 2002tii turbo kit proto. It was setup with a custom built harness, running ms2-e, wasted spark, Tom's (from 02again.com, awesome dude, great to deal with and good prices!) 36-1 bolt-on crank pulley tooth wheel and sensor bracket, 24lb injectors, 7psi internally gated gt28.
Started out with some dual webers, which were tuned like cat shit. Wires were running everywhere (messy electricals are my pet peeve) with speaker wire literally melting off the firewall because it was used as ignition coil wire.:tsk::tsk::tsk:. Long story short, I did more work than I was paid to do, just so I could have peace of mind the car wouldn't catch on fire and the have the customer point fingers.
While it was in progress. I was building the harness at this time and had a few place holder parts (like the m20 injectors)
Before & After Pics
Derek
DedericMS
Comment
-
Bought some 80lb injectors. Can't wait to dyno more power :up:Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
www.gecoils.com
My euro 316 project Transaction Feedback
Comment
Comment