Spacers and Adapters....100% custom

[jeffw]

hmmmm..... I'll have to look into it a bit i'm not sure

[z31maniac]

Hmmmm, this has me considering some high offset RS. 17" 5 lug RSs are pretty widely available and pretty affordable.

What would be the largest adapter you'd want to make, thickness wise?

[B2ThaZiZza]

im interested in some 5x100-5x120 toyota 54.1mm centerbore

[zack.dawley]

Sent a pm, but I need 45mm spacers for my E34. You will make my month if I can still get these.

[e30Rob]

Back up and running.....from now on they will be shipped per order rather than a GB!!

[e30Rob]

Hmmmm, this has me considering some high offset RS. 17" 5 lug RSs are pretty widely available and pretty affordable.

What would be the largest adapter you'd want to make, thickness wise?

They can be had with a pritty decent size...just depends on what you want

im interested in some 5x100-5x120 toyota 54.1mm centerbore

can be done no problem

Sent a pm, but I need 45mm spacers for my E34. You will make my month if I can still get these.

at this thickness you would have to go adapters....5x120 to 5x120....there arent lugs long enough to fit through a 45mm spacer. However if you want that thickness and source your own hardware that would not be a problem. Price would increase slightly due to the amount of material used.

[sharky]

If someone can assist me with what sizes I should use running 16x7 Alpinas w/ 28et on 215/45 16's and a 87 is then I would be in for a whole set. I want to push the wheels out a bit to get them a bit more flush, not looking for stanceworks poke or anything just something a bit more aggressive.

[e30Rob]

i personally would do a 10mm in the front and a 15mm in the back.

[e30Rob]

Check em out guys...where up and running again

[Matt-B]

ill most likely be in contact way before the picnic...

adapters are cheaper then redrill

[e30Rob]

ill most likely be in contact way before the picnic...

adapters are cheaper then redrill

I'm not sure what picnic u might be talkin about but ok...lol

and yes adapters are cheaper than a redrill.

-Rob

[Matt-B]

e30 pinic is the PNW 200-300 e30s every year lol

so yea ill be in contact and i did look around


these are the best quality and best price. sorry about dickering with the price in the past

[e30Rob]

e30 pinic is the PNW 200-300 e30s every year lol

so yea ill be in contact and i did look around


these are the best quality and best price. sorry about dickering with the price in the past

It's cool man, i gots no hard feelings..lol I figured you would look around just like i suggested and find what you found.

Look forward to hearing from you.

-Rob

[bimmer_E30]

Do you have any 5mm spacers?

[e30Rob]

Do you have any 5mm spacers?

Direct quote from the first page:

- Hubcentric spacers (sold as pairs)
- 3 to 8mm. $50.00
- 9 to 17.5mm. $65.00
- 18 to 30mm. $75.00