Spacers and Adapters....100% custom

[jeswaw]

so what are the chances of you making 4x100 to 5x120 adapters? and how much

The chances are great, just send him some money and tell him what size/offset/what design/what not and he can make it happen. He's making a set for me eventually.

[Aptyp]

what kind of money though?

[e30Rob]

what kind of money though?

Just like listed on page where all the prices are, the 1pc adapter design for overlapping bolt patterns will be 360.00+shipping. This includes all special hardware.

-Rob

[Todd Black 88]

How about a 5-120, 8mm spacer for an e39 wheel to a regular/standard bmw 72.XX mm hub.
This way no F!@#ing hub rings. Specifically for those e39 style 5 two piece wheels that have a tapered backside?

[e30Rob]

How about a 5-120, 8mm spacer for an e39 wheel to a regular/standard bmw 72.XX mm hub.
This way no F!@#ing hub rings. Specifically for those e39 style 5 two piece wheels that have a tapered backside?

This is very doable, please check OP for pricing.

-Rob

[e30_325es]

What's the thinnest 4x100 to 5x130 can you do? And can you do 14x1.25 bolts for the hub (07 Mini cooper).

[Todd Black 88]

This is very doable, please check OP for pricing.

-Rob

Great!

So you can match the angle on the back side of the e39 two piece style fives, tapered down to e39 hub bore OD with e30 m3 ID?

If so, i will definately take a pair of 8mm and a pair of 5mm.

LMK.
do you have access to a style 5 rim to measure?

Cheers
Todd

[e30Rob]

Great!

So you can match the angle on the back side of the e39 two piece style fives, tapered down to e39 hub bore OD with e30 m3 ID?

If so, i will definately take a pair of 8mm and a pair of 5mm.

LMK.
do you have access to a style 5 rim to measure?

Cheers
Todd

So are basically wanting to fit e39 style 5's on your e30 m3?

-Rob

[e30Rob]

What's the thinnest 4x100 to 5x130 can you do? And can you do 14x1.25 bolts for the hub (07 Mini cooper).

20mm


-Rob

[Todd Black 88]

So are basically wanting to fit e39 style 5's on your e30 m3?

-Rob

Yes....I already have them on my car now.

Problem is they are e39 hub bore, so i need thin piddly hub rings, that get damaged all the time, to keep from getting a shimmy.
I also need to run min 5mm spacer in the front to clear the caliper without removing the anti squel clips.(I run 5mm now but its not enough with new pads)
So now i have spaced the fronts, I want to space the rears, but there is more room in the fenders so i want to go 8mm.(I have 5mm now)
Now because the difference is so little in hub diameters, you cannot make a 5mm spacer with a hub centric adapter built on from 74.xxmm (e39) to 72.xx(everything else 5 lug) and have it not be flimsy. But... the style 5's have a tapered rear on the inner barrel, so I thought it may work if that was also used for allignment.
It would be great to get it all on one piece so its easier to install.


Simple ........right? LOL

[e30s52]

/\ You know you can just use a grinder to to take some of the slip down right? I did it to mine and they work great.

[e30Rob]

/\ You know you can just use a grinder to to take some of the slip down right? I did it to mine and they work great.

Ya what he said, Not to slap ,myself in the face and loose a sale but it would be more cost efficient and easier on you to do what Alex mentioned above.


-Rob

[Todd Black 88]

/\ You know you can just use a grinder to to take some of the slip down right? I did it to mine and they work great.

HUH? Slip down.......I'm lost.

[e30s52]

HUH? Slip down.......I'm lost.

Sorry, grind down. They are 5 bucks I think but sence you have an m3 it would make sence to get spacers so they fit right.

[Todd Black 88]

O you mean the anti rattle clips? yeah i could grind them down so I don't need spacers, but the real issue is the rings being so flimsy.
I was just hoping to get custom spacers with rings built in to go from regular bmw hub to e39 hub diameter to make wheel installs easier and rings stronger by including the extra meat with the tapered part.