Spacers and Adapters....100% custom

[e30Rob]

all pm's returned an all orders palced

[motorsports_3]

Interested to find out about this also. I was planning to use them both in order to have spacers that were 57.1 ID and OD and could be used with other applications (Wheels) while just changing the hub centering rings if need be. But if it is a bad idea to do so then I will just forget about the rings and get the spacers to the ID and OD I need for the specific wheel I am planning to run at the moment.

T.I.A.

Yeah I had never heard anything about this elsewhere. I couldnt wait and just ordered from someone else. I hope I dont have any problems.

[///M-TRD3]

So it is bad to run spacers along with centering rings? Why is that?

If so when I order spacers I should get them to be 57.1 ID and whatever my wheel is OD?

Interested to find out about this also. I was planning to use them both in order to have spacers that were 57.1 ID and OD and could be used with other applications (Wheels) while just changing the hub centering rings if need be. But if it is a bad idea to do so then I will just forget about the rings and get the spacers to the ID and OD I need for the specific wheel I am planning to run at the moment.

T.I.A.

[E30_pilot]

payment sent

[motorsports_3]

PM sent

[Genkboy8o8]

Sent you a pm about my spacers...

[motorsports_3]

So it is bad to run spacers along with centering rings? Why is that?

If so when I order spacers I should get them to be 57.1 ID and whatever my wheel is OD?

When you make spacers could you kind of flair the inside lip. I am putting the RX7 brake kit and the rotor is about 1mm thinner so the hub bore sticks out which is 66mm.

Any idea about this?

[e30Rob]

Just got my wheels in, how much for a pair of 25mm or 30mm (need to remeasure after mount tires) hub centric spacers shipped to 95404. Business address if that helps.

$75 for the spacers
$1.50 per lug
$20 for shipping

Let me know if i can assist u further.

-Rob

[E30_pilot]

Just got my wheels in, how much for a pair of 25mm or 30mm (need to remeasure after mount tires) hub centric spacers shipped to 95404. Business address if that helps.

[motorsports_3]

hub-centric spacer will be the option you should settle on. It is a bad idea to run spacers AND hub rings.

So it is bad to run spacers along with centering rings? Why is that?

If so when I order spacers I should get them to be 57.1 ID and whatever my wheel is OD?

When you make spacers could you kind of flair the inside lip. I am putting the RX7 brake kit and the rotor is about 1mm thinner so the hub bore sticks out which is 66mm.

[e30Rob]

Roger roger, i'm going to test fit a few offsets and get back to you !

Sounds great just let me know.

[mkcman17]

hub-centric spacer will be the option you should settle on. It is a bad idea to run spacers AND hub rings.

Roger roger, i'm going to test fit a few offsets and get back to you !

[e30Rob]

Question...I've got a set of et35 wheels that have bigger centerbore. Would I need rings and spacers or will hubcentric spacers do it?

hub-centric spacer will be the option you should settle on. It is a bad idea to run spacers AND hub rings.

[mkcman17]

Question...I've got a set of et35 wheels that have bigger centerbore. Would I need rings and spacers or will hubcentric spacers do it?

[MR 325]

I just got my custom spacers and they are fucking amazing.

Best set of spacers I have ever seen.