Spacers and Adapters....100% custom

[e30Rob]

Tired of paying the crazy prices for spacers and adapters?

We are just enthusiast trying to corner the market and give back to the community. We're happy to bring great quality and prices to the members here on R3vlimited. These spacers are 100% customizable to YOUR specifications!! Want that certain spec of spacer or adapter so you can really dial in that stance that you want. Whether it be flush or poked we got you covered. Any thickness any bolt pattern not a problem.

These are 100% quality with a LIFETIME warranty. Not that cheap crap that comes from China...100% American made, with the highest quality Alcoa 6061t6 Billet Aluminum.

Please keep in mind these are custom built to your order so allow for production and shipping times.


- HARDWARE
- All extended lugs - $2.00 ea.
- 2pc Porsche style lugs - $3.00 ea.
- Black BMW lugs - $3.00 ea.


- 4x100 to 5x130.
Special Porsche lugs included to match your wheels.
- 20mm - 35mm - $320.00
- Also can do custom 15mm - 19mm with a lug conversion and lugs nuts - $330.00 for everything


- 4 lug to 4 lug
Hardware to secure adapters included.
- 15mm - 19mm - $270.00
- 20mm - 30mm - $260.00

- 5 lug to 5 lug
Hardware to secure adapters included
- 15mm - 19mm - $280.00
- 20mm - 30mm - $270.00



- Over lapping bolt patterns
- 4x100 to 5x112/114.3/120/120.65
Alleviates that need for a 5 lugs swap for you 4 lug guys!!!

- 18mm - 40mm - $360.00 with all hardware (adapter and wheel)



- Hubcentric spacers (sold as pairs)
- 3mm - $35.00
- 5mm - $40.00
- 8mm - $50.00
- 10mm - $60.00
- Wheel and hubcentric spacers (sold as pairs)
- 13mm - $65.00
- 15mm - $70.00
- 20mm - $75.00
- 25mm - $80.00
**sizes in between the above mentioned sizes available as well**



- Hub-centric rings....$70.00 (a set)

[e30Rob]

Buyers List:

1. bataangpinoy - (2) 10mm hub centric 4x100 spacers w/ 8 extended lugs...dual HB 57.1
2. ZM Blue Devil - (4) 4x100-5x120 adapters 20mm
3. Dave - (2) 15mm hub centric 4x100 spacers
4. Brandon450- (2) 16mm 4x100 hub centric spacers
5.
6.
7.
8.

[Mr Two]

Can you do 4x100 to 5x114.3?

[e30Rob]

Can you do 4x100 to 5x114.3?

Yes this would fall under the over lapping bolt pattern category. 1pc or 2 pc obviously your choice

-Rob

[ZM Blue Devil]

We are going to be working with Rob to offer these products at Guten Parts. If anyone local to us is interested we can have them shipped bulk to shop to save a few bucks.

The quality is top notch. Looking forward to getting a couple of sets of these to try out some crazy wheel fitments.

[e30Rob]

Speak of the Devil...the blue devil that is...haha

Thanks for the kind words L.

[vivalegreg]

how would an e30 look with 996 turbo wheels..hmm

[e30Rob]

you got me wondering that one now...lol

Hell guys do D90's all the time right? and comes out good

[vivalegreg]

oh man do i want its gonna be hard to get that dead line tho eh

[Edev]

Oh gosh. Hey e30rob, sorry I didn't PM you back. My box was 99% full and accidently deleted everything I had in there. I'm going to shoot you a PM now though. And I agree with the guy above me..vivalegreg.

[namsayin]

you are win rob!

[MR 325]

This is great, staying tuned!!!

[e30Rob]

So is it a general consensus that i should move the end date further away?

How does the 15th of october sound?

If you would like to see an end date change please send me a pm and the date that gets the most requests will be the New end date.

Please keep in mind that i can not push the dates back to far.

thank you
-Rob

[e30Rob]

Ok so some of you have expressed concern on safety of running these. First i will tell you again that these area made up of 6061t6 billet, which is very very strong. Here a few links and quotes from very good websites and even a few racing websites.

"Applications: Aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors, decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts; bike frames."
http://asm.matweb.com/search/Specifi...ssnum=MA6061T6

"6061-T6 Billet Aluminum
T6 temper 6061 has an ultimate tensile strength of at least 42,000 psi (290 MPa) and yield strength of at least 35,000 psi (241 MPa). In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. This is a true billet aluminum which means it comes in extruded bars instead of poured into a casting."
http://www.cvfracing.com/index.php?r...ormation_id=10

And my personal favorite.....wiki....:grin:

"6061-T6
T6 temper 6061 has an ultimate tensile strength of at least 42,000 psi (290 MPa) and yield strength of at least 35,000 psi (241 MPa). In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The famous Pioneer plaque was made of this particular alloy."

"Uses

6061 is widely used for construction of aircraft structures, such as wings and fuselages, more commonly in homebuilt aircraft than commercial or military aircraft.[2]
6061 is used for yacht construction, including small utility boats.[3]
6061 is commonly used in the construction of bicycle frames and components. One also finds 7005 aluminum popular for bicycle frames and 7075 aluminum for other components.
6061 is also used in automotive parts, such as wheel spacers.
6061 is also used in the manufacture of aluminum cans for the packaging of foodstuffs and beverages."


"6061 This is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form (“Alclad”) with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required."
http://www.aircraftspruce.com/catalo...s/aluminfo.php

Sorry for the long read, but i tend to do research before i get into things....:crazy:

[sharky]

I would be in for some spacers if I can figure out what size I need on a 7in alpina w/ 215/45/16 on a early car to make it somewhat flush.