M20 Long Tube Header GB Feeler

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • mkcman17
    replied
    44. mkcman17

    if it's still under $200 shipped and tax, i'm in.

    Leave a comment:


  • Paradox
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. E30huh, no coat
    18. txtorquemade, m20 no coating
    19. 88superetabd , m20 no coat (unless coating is cheap)
    20. e304lyfe
    21. streichholzschächtelchen coated
    22. zm blue devil m20 non coated
    23. zm blue devil m42 non coated
    24. MrSlacker, m20, coating depending on cost
    25: woodisgood. M20
    26:thornado327i: M20 / coated
    27 NC325iC - m20 coated
    28. Overlord475 - m20 coating depending on cost
    29. Peaveybassist - m20 no coat
    30. InuFaye-m20 coating depending on cost.
    31. richardkeith97 - m20 coating depending on cost
    32. handysmurf59 - m20 coating depending on cost.
    33. Schtozo - m20, coating depends on cost
    34. DrJosh - M20, coating depends on cost
    35. wh00sh - M20, coating depends on cost
    36. 2slowe30-M20 no coating
    37. RagtopE30-M20 no coating
    38. pilotskillse30-M20 coating
    39. bwells m20 coated
    40. murcielago543 M20 no coating
    41. jayuuey M20 no coating
    42. MitchD1283 M20 Coated pending final price.

    43. Paradox M20 coated - subject to pictures and price

    Leave a comment:


  • MitchD1283
    replied
    Originally posted by jayuuey
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. E30huh, no coat
    18. txtorquemade, m20 no coating
    19. 88superetabd , m20 no coat (unless coating is cheap)
    20. e304lyfe
    21. streichholzschächtelchen coated
    22. zm blue devil m20 non coated
    23. zm blue devil m42 non coated
    24. MrSlacker, m20, coating depending on cost
    25: woodisgood. M20
    26:thornado327i: M20 / coated
    27 NC325iC - m20 coated
    28. Overlord475 - m20 coating depending on cost
    29. Peaveybassist - m20 no coat
    30. InuFaye-m20 coating depending on cost.
    31. richardkeith97 - m20 coating depending on cost
    32. handysmurf59 - m20 coating depending on cost.
    33. Schtozo - m20, coating depends on cost
    34. DrJosh - M20, coating depends on cost
    35. wh00sh - M20, coating depends on cost
    36. 2slowe30-M20 no coating
    37. RagtopE30-M20 no coating
    38. pilotskillse30-M20 coating
    39. bwells m20 coated
    40. murcielago543 M20 no coating
    41. jayuuey M20 no coating
    42. MitchD1283 M20 Coated pending final price.

    Leave a comment:


  • MaksV
    replied
    A little teaser.



    the prototype headers had crappy single cylinder flanges put on them since thats what the place that made them had available. The final production units will have solid single flange pieces like these welded on. Since we didn't have dimensions handy we simply bought a set form Whitee30. These are just for the prototype.

    Leave a comment:


  • der affe
    replied
    No negative jabs. I am a welder/fabricator, do production work, and headers (custom to each vehicle ) the way things are proceeding on this are just backwards, but you have to go about doing it the way your manufacturer dictates.

    Another tip for you, on smaller engines and smaller primary tube diameters, the simple welded "cross hair " come will flow as much and as smoothly as a profiled cone at a decent $ savings for production costs. Since you are going with no larger than 1 5/8" primaries, this would apply.

    Leave a comment:


  • MaksV
    replied
    Originally posted by einstein57
    10 pages and not even a CAD drawing? Prototyping mock ups? Drawings on a coctail napkin?
    the prototype is on its way here.

    Originally posted by SickE30
    Drawing on cocktail napkin
    1.Sicke30
    Originally posted by Overlord475
    Hahaha!

    But seriously..... +1
    funny guys.

    Originally posted by schtozo
    Is this project dead??
    nope

    Originally posted by nando
    almost a month ago..
    yup


    Originally posted by der affe
    Why is the prototype not made HERE (where your exhaust guru is supposed to reside)?

    It would make sense to keep costs down buy manufacturing them in China (as long as an acceptable level of quality was maintained ), but I see no plausible reason to have the header designed and manufactured in China, shipped here, dyno tested and checked for clearence issues, THEN sent BACK for changes if there is any issues. From a seller/manufacturers stand point, that is just wastefull and inefficient.

    So, what is the REAL story on this?
    it is exactly what you wrote there. we have a place over there that is set upto machine these bad boys, they have sent us a prototype with single flanges - we bought white325 solid flanges that we are going to weld ontothe prototype and when we sent it back all the new ones will come with the stronger single flanges.

    now this project is on track but I can only tellyou what I know. I am told that the headers are on their way here, so thats what I am telling you. I promise it will all be worth the wait - however negatice comments are not necessary. I am a full time engineering student and Anthony is experiancing family issues. Realistically these headers are not either of our top priority, but we are working on it as we can.

    Leave a comment:


  • der affe
    replied
    Why is the prototype not made HERE (where your exhaust guru is supposed to reside)?

    It would make sense to keep costs down buy manufacturing them in China (as long as an acceptable level of quality was maintained ), but I see no plausible reason to have the header designed and manufactured in China, shipped here, dyno tested and checked for clearence issues, THEN sent BACK for changes if there is any issues. From a seller/manufacturers stand point, that is just wastefull and inefficient.

    So, what is the REAL story on this?

    Leave a comment:


  • nando
    replied
    Originally posted by MaksV
    Ok so I need to apologize again. I was really excited because they were finished and had arrived in the states. or so I thought.

    apparently there was a mixup and they didnt get shipped. We contacted the company and they will ship them out ASAP. but I am gonna have to ask you guys to keep waiting. As soon as this prototype model is here, we will fit it to my car, make adjustments and have them mass produced. I again apologize for the delays.
    almost a month ago..

    Leave a comment:


  • schtozo
    replied
    Is this project dead??

    Leave a comment:


  • Overlord475
    replied
    Originally posted by SickE30
    Drawing on cocktail napkin
    1.Sicke30
    Hahaha!

    But seriously..... +1

    Leave a comment:


  • SickE30
    replied
    Drawing on cocktail napkin
    1.Sicke30

    Leave a comment:


  • einstein57
    replied
    10 pages and not even a CAD drawing? Prototyping mock ups? Drawings on a coctail napkin?
    Last edited by einstein57; 01-24-2011, 07:06 PM.

    Leave a comment:


  • SickE30
    replied
    Originally posted by jayuuey
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. E30huh, no coat
    18. txtorquemade, m20 no coating
    19. 88superetabd , m20 no coat (unless coating is cheap)
    20. e304lyfe
    21. streichholzschächtelchen coated
    22. zm blue devil m20 non coated
    23. zm blue devil m42 non coated
    24. MrSlacker, m20, coating depending on cost
    25: woodisgood. M20
    26:thornado327i: M20 / coated
    27 NC325iC - m20 coated
    28. Overlord475 - m20 coating depending on cost
    29. Peaveybassist - m20 no coat
    30. InuFaye-m20 coating depending on cost.
    31. richardkeith97 - m20 coating depending on cost
    32. handysmurf59 - m20 coating depending on cost.
    33. Schtozo - m20, coating depends on cost
    34. DrJosh - M20, coating depends on cost
    35. wh00sh - M20, coating depends on cost
    36. 2slowe30-M20 no coating
    37. RagtopE30-M20 no coating
    38. pilotskillse30-M20 coating
    39. bwells m20 coated
    40. murcielago543 M20 no coating
    41. jayuuey M20 no coating
    42. sicke30 no coating
    Last edited by SickE30; 01-24-2011, 07:57 PM.

    Leave a comment:


  • Philo
    replied
    Also, I'd like to point out that unless both dynos on the E46 were same day, same machine, they could easily be off the 11HP.

    Air pressure, temperature, and humidity have a bunch to do with dyno tests.

    Leave a comment:


  • jayuuey
    replied
    1.mvrk10256, m20 headers, no coat.
    2.structured, m20 headers, coat ?
    3.jaycheetwood, m20, no coat.
    4. blocke, m20 headers, possibly with coat-depending on how much more $
    5.Shangsta m20 headers, no coat
    6.jasonsnoddy, m20, no coat
    7.gobig_us, m20, no coat
    8.bpmack16, m20, coated (color?)
    9.325ix, m20, coat?
    10. Joonsup, m20, no coat
    11. CabbE30, m20, no coat
    12. XvillainousX
    13.dkmr, m20, non coated
    14. BigTe30, m20, no coating
    15.maximus_pr m20 ,no coat
    16. TrentW, no coat
    17. E30huh, no coat
    18. txtorquemade, m20 no coating
    19. 88superetabd , m20 no coat (unless coating is cheap)
    20. e304lyfe
    21. streichholzschächtelchen coated
    22. zm blue devil m20 non coated
    23. zm blue devil m42 non coated
    24. MrSlacker, m20, coating depending on cost
    25: woodisgood. M20
    26:thornado327i: M20 / coated
    27 NC325iC - m20 coated
    28. Overlord475 - m20 coating depending on cost
    29. Peaveybassist - m20 no coat
    30. InuFaye-m20 coating depending on cost.
    31. richardkeith97 - m20 coating depending on cost
    32. handysmurf59 - m20 coating depending on cost.
    33. Schtozo - m20, coating depends on cost
    34. DrJosh - M20, coating depends on cost
    35. wh00sh - M20, coating depends on cost
    36. 2slowe30-M20 no coating
    37. RagtopE30-M20 no coating
    38. pilotskillse30-M20 coating
    39. bwells m20 coated
    40. murcielago543 M20 no coating
    41. jayuuey M20 no coating

    Leave a comment:

Working...