44. mkcman17
if it's still under $200 shipped and tax, i'm in.
M20 Long Tube Header GB Feeler
Collapse
X
-
1.mvrk10256, m20 headers, no coat.
2.structured, m20 headers, coat ?
3.jaycheetwood, m20, no coat.
4. blocke, m20 headers, possibly with coat-depending on how much more $
5.Shangsta m20 headers, no coat
6.jasonsnoddy, m20, no coat
7.gobig_us, m20, no coat
8.bpmack16, m20, coated (color?)
9.325ix, m20, coat?
10. Joonsup, m20, no coat
11. CabbE30, m20, no coat
12. XvillainousX
13.dkmr, m20, non coated
14. BigTe30, m20, no coating
15.maximus_pr m20 ,no coat
16. TrentW, no coat
17. E30huh, no coat
18. txtorquemade, m20 no coating
19. 88superetabd , m20 no coat (unless coating is cheap)
20. e304lyfe
21. streichholzschächtelchen coated
22. zm blue devil m20 non coated
23. zm blue devil m42 non coated
24. MrSlacker, m20, coating depending on cost
25: woodisgood. M20
26:thornado327i: M20 / coated
27 NC325iC - m20 coated
28. Overlord475 - m20 coating depending on cost
29. Peaveybassist - m20 no coat
30. InuFaye-m20 coating depending on cost.
31. richardkeith97 - m20 coating depending on cost
32. handysmurf59 - m20 coating depending on cost.
33. Schtozo - m20, coating depends on cost
34. DrJosh - M20, coating depends on cost
35. wh00sh - M20, coating depends on cost
36. 2slowe30-M20 no coating
37. RagtopE30-M20 no coating
38. pilotskillse30-M20 coating
39. bwells m20 coated
40. murcielago543 M20 no coating
41. jayuuey M20 no coating
42. MitchD1283 M20 Coated pending final price.
43. Paradox M20 coated - subject to pictures and priceLeave a comment:
-
1.mvrk10256, m20 headers, no coat.
2.structured, m20 headers, coat ?
3.jaycheetwood, m20, no coat.
4. blocke, m20 headers, possibly with coat-depending on how much more $
5.Shangsta m20 headers, no coat
6.jasonsnoddy, m20, no coat
7.gobig_us, m20, no coat
8.bpmack16, m20, coated (color?)
9.325ix, m20, coat?
10. Joonsup, m20, no coat
11. CabbE30, m20, no coat
12. XvillainousX
13.dkmr, m20, non coated
14. BigTe30, m20, no coating
15.maximus_pr m20 ,no coat
16. TrentW, no coat
17. E30huh, no coat
18. txtorquemade, m20 no coating
19. 88superetabd , m20 no coat (unless coating is cheap)
20. e304lyfe
21. streichholzschächtelchen coated
22. zm blue devil m20 non coated
23. zm blue devil m42 non coated
24. MrSlacker, m20, coating depending on cost
25: woodisgood. M20
26:thornado327i: M20 / coated
27 NC325iC - m20 coated
28. Overlord475 - m20 coating depending on cost
29. Peaveybassist - m20 no coat
30. InuFaye-m20 coating depending on cost.
31. richardkeith97 - m20 coating depending on cost
32. handysmurf59 - m20 coating depending on cost.
33. Schtozo - m20, coating depends on cost
34. DrJosh - M20, coating depends on cost
35. wh00sh - M20, coating depends on cost
36. 2slowe30-M20 no coating
37. RagtopE30-M20 no coating
38. pilotskillse30-M20 coating
39. bwells m20 coated
40. murcielago543 M20 no coating
41. jayuuey M20 no coating
42. MitchD1283 M20 Coated pending final price.Leave a comment:
-
A little teaser.

the prototype headers had crappy single cylinder flanges put on them since thats what the place that made them had available. The final production units will have solid single flange pieces like these welded on. Since we didn't have dimensions handy we simply bought a set form Whitee30. These are just for the prototype.Leave a comment:
-
No negative jabs. I am a welder/fabricator, do production work, and headers (custom to each vehicle ) the way things are proceeding on this are just backwards, but you have to go about doing it the way your manufacturer dictates.
Another tip for you, on smaller engines and smaller primary tube diameters, the simple welded "cross hair " come will flow as much and as smoothly as a profiled cone at a decent $ savings for production costs. Since you are going with no larger than 1 5/8" primaries, this would apply.Leave a comment:
-
the prototype is on its way here.
funny guys.
nope
yup
it is exactly what you wrote there. we have a place over there that is set upto machine these bad boys, they have sent us a prototype with single flanges - we bought white325 solid flanges that we are going to weld ontothe prototype and when we sent it back all the new ones will come with the stronger single flanges.Why is the prototype not made HERE (where your exhaust guru is supposed to reside)?
It would make sense to keep costs down buy manufacturing them in China (as long as an acceptable level of quality was maintained ), but I see no plausible reason to have the header designed and manufactured in China, shipped here, dyno tested and checked for clearence issues, THEN sent BACK for changes if there is any issues. From a seller/manufacturers stand point, that is just wastefull and inefficient.
So, what is the REAL story on this?
now this project is on track but I can only tellyou what I know. I am told that the headers are on their way here, so thats what I am telling you. I promise it will all be worth the wait - however negatice comments are not necessary. I am a full time engineering student and Anthony is experiancing family issues. Realistically these headers are not either of our top priority, but we are working on it as we can.Leave a comment:
-
Why is the prototype not made HERE (where your exhaust guru is supposed to reside)?
It would make sense to keep costs down buy manufacturing them in China (as long as an acceptable level of quality was maintained ), but I see no plausible reason to have the header designed and manufactured in China, shipped here, dyno tested and checked for clearence issues, THEN sent BACK for changes if there is any issues. From a seller/manufacturers stand point, that is just wastefull and inefficient.
So, what is the REAL story on this?Leave a comment:
-
almost a month ago..Ok so I need to apologize again. I was really excited because they were finished and had arrived in the states. or so I thought.
apparently there was a mixup and they didnt get shipped. We contacted the company and they will ship them out ASAP. but I am gonna have to ask you guys to keep waiting. As soon as this prototype model is here, we will fit it to my car, make adjustments and have them mass produced. I again apologize for the delays.Leave a comment:
-
-
10 pages and not even a CAD drawing? Prototyping mock ups? Drawings on a coctail napkin?Last edited by einstein57; 01-24-2011, 07:06 PM.Leave a comment:
-
1.mvrk10256, m20 headers, no coat.
2.structured, m20 headers, coat ?
3.jaycheetwood, m20, no coat.
4. blocke, m20 headers, possibly with coat-depending on how much more $
5.Shangsta m20 headers, no coat
6.jasonsnoddy, m20, no coat
7.gobig_us, m20, no coat
8.bpmack16, m20, coated (color?)
9.325ix, m20, coat?
10. Joonsup, m20, no coat
11. CabbE30, m20, no coat
12. XvillainousX
13.dkmr, m20, non coated
14. BigTe30, m20, no coating
15.maximus_pr m20 ,no coat
16. TrentW, no coat
17. E30huh, no coat
18. txtorquemade, m20 no coating
19. 88superetabd , m20 no coat (unless coating is cheap)
20. e304lyfe
21. streichholzschächtelchen coated
22. zm blue devil m20 non coated
23. zm blue devil m42 non coated
24. MrSlacker, m20, coating depending on cost
25: woodisgood. M20
26:thornado327i: M20 / coated
27 NC325iC - m20 coated
28. Overlord475 - m20 coating depending on cost
29. Peaveybassist - m20 no coat
30. InuFaye-m20 coating depending on cost.
31. richardkeith97 - m20 coating depending on cost
32. handysmurf59 - m20 coating depending on cost.
33. Schtozo - m20, coating depends on cost
34. DrJosh - M20, coating depends on cost
35. wh00sh - M20, coating depends on cost
36. 2slowe30-M20 no coating
37. RagtopE30-M20 no coating
38. pilotskillse30-M20 coating
39. bwells m20 coated
40. murcielago543 M20 no coating
41. jayuuey M20 no coating
42. sicke30 no coatingLast edited by SickE30; 01-24-2011, 07:57 PM.Leave a comment:
-
Also, I'd like to point out that unless both dynos on the E46 were same day, same machine, they could easily be off the 11HP.
Air pressure, temperature, and humidity have a bunch to do with dyno tests.Leave a comment:
-
1.mvrk10256, m20 headers, no coat.
2.structured, m20 headers, coat ?
3.jaycheetwood, m20, no coat.
4. blocke, m20 headers, possibly with coat-depending on how much more $
5.Shangsta m20 headers, no coat
6.jasonsnoddy, m20, no coat
7.gobig_us, m20, no coat
8.bpmack16, m20, coated (color?)
9.325ix, m20, coat?
10. Joonsup, m20, no coat
11. CabbE30, m20, no coat
12. XvillainousX
13.dkmr, m20, non coated
14. BigTe30, m20, no coating
15.maximus_pr m20 ,no coat
16. TrentW, no coat
17. E30huh, no coat
18. txtorquemade, m20 no coating
19. 88superetabd , m20 no coat (unless coating is cheap)
20. e304lyfe
21. streichholzschächtelchen coated
22. zm blue devil m20 non coated
23. zm blue devil m42 non coated
24. MrSlacker, m20, coating depending on cost
25: woodisgood. M20
26:thornado327i: M20 / coated
27 NC325iC - m20 coated
28. Overlord475 - m20 coating depending on cost
29. Peaveybassist - m20 no coat
30. InuFaye-m20 coating depending on cost.
31. richardkeith97 - m20 coating depending on cost
32. handysmurf59 - m20 coating depending on cost.
33. Schtozo - m20, coating depends on cost
34. DrJosh - M20, coating depends on cost
35. wh00sh - M20, coating depends on cost
36. 2slowe30-M20 no coating
37. RagtopE30-M20 no coating
38. pilotskillse30-M20 coating
39. bwells m20 coated
40. murcielago543 M20 no coating
41. jayuuey M20 no coatingLeave a comment:

Leave a comment: