Here is the group buy for the 555 Clear Wind Fairing.
The units are made from .125 PETG and are water cut.
The Fairing will come with all the mounting hardware.
You will receive:
1 Fairing
3 square brackets
3 rectangular washers
3 1/4"x20 carriage bolts
3 1/4" nylon washers
6 1/4"x20 wing nuts
3 button top 1/4x20 bolts
6 1/4" washers
3 strut brackets
1 clear protective strip (not pictured)
$79.95 shipped to the lower 48.
A $40 deposit is require to secure your purchase. Once I receive the order, I will send an email or pm for the balance.
Payment in full can be made initially if you like.
I will be placing the order on Monday, February 13th 2012.
Deposits can be submitted via paypal - amartt@yahoo.com
If you have any questions, please send me a pm.
Please add your user name and which board you are on in the note section of paypal and drop me a pm once you have made your deposit.
Thanks.
Image below is of the square clamp that goes around the load bar.
Image below is of the button screw used to secure the fairing to the strut bracket. The nylon washer goes on the fairing side.
The units are made from .125 PETG and are water cut.
The Fairing will come with all the mounting hardware.
You will receive:
1 Fairing
3 square brackets
3 rectangular washers
3 1/4"x20 carriage bolts
3 1/4" nylon washers
6 1/4"x20 wing nuts
3 button top 1/4x20 bolts
6 1/4" washers
3 strut brackets
1 clear protective strip (not pictured)
$79.95 shipped to the lower 48.
A $40 deposit is require to secure your purchase. Once I receive the order, I will send an email or pm for the balance.
Payment in full can be made initially if you like.
I will be placing the order on Monday, February 13th 2012.
Deposits can be submitted via paypal - amartt@yahoo.com
If you have any questions, please send me a pm.
Please add your user name and which board you are on in the note section of paypal and drop me a pm once you have made your deposit.
Thanks.
Image below is of the square clamp that goes around the load bar.
Image below is of the button screw used to secure the fairing to the strut bracket. The nylon washer goes on the fairing side.
