CAtuned *** BMW 2002 mounts for F20C Swap -S2K

[catuned]

You have seen our 2002 with the S2K motor installed and ripping it up.
Some of you have seen the car at Bimmerfest.

We have been going over the original design and have updated and upgraded the mounts. They are even better. They will come powder coated. Order them ahead of time and you can choose the color. Renewed Finishes will do that. With the new mounts you even have room for Turbo or etc. We have over 4K miles on our car with this set-up. Went to bimmerfest and back, etc.. Zero Problems.

1) This is what comes in the kit:

Additionally there will be hardware supplied as well (not pictured).



2) By buying this kit you will also receive a guide on how to do this swap. A list of items needed, Pictures and instructions. You will also receive technical support with basic help over the phone. We can't do your install for you across the phone but will answer questions on this or that. Bare in mind you do have to have Automotive knowledge to do this. The front sub frame has to be modified. We can modify it for you if you like us to. The Thermostat housing has to be replaced and rewelded. We can sell you one ready to go or can show you how to do it. Etc.. etc..
How to wire it up, etc. So you are not just getting the mounts you are getting it done.

NEW PRICE The kit is: $399 USD shipping in the CONUS (does not include powder coating or support at this level)
$599 Powder Coated and Full Install Support

Optional items available:
Modified Thermostat housing_ Brand New: $80
Transmission Tunnel: $150
EGR Block off plate: $30
AEM EMS2 Stand Alone Management: ~~$1500

Auto Heaven
CAtuned Motorsports
Igor P.
2609 Fulton Ave.
Sacramento, CA 95821
(916) 481-2312 Shop
www.catuned.com











Here it is in the car:

[kronus]

Awesome.

Does this use an existing hole in the driver-side subframe? Do you have to cut the regular driver-side mount?

[catuned]

Awesome.

Does this use an existing hole in the driver-side subframe? Do you have to cut the regular driver-side mount?

Here is an example of what has to be done to the subframe:





We have a step by step on what needs to be done!

[deutschman]

These guys are good. I have been to there shop a few times, seen the swapped 02 in person, and even sold them my partially finished m20 swapped 02 knowing they would do a good job finishing what I started.
Anyone that buys a mount kit will not be disappointed in the service provided, or the quality of the parts.


Have you guys posted this on the 02 FAQ yet?
I know some people over there were interested.

[catuned]

Thx Jeremy.. Yes I did..

If you would please post a comment on there. We dont have that many feed-backs.

[Dsun]

woow s2k in a 2002...that will be a fun ass car to drive!

[catuned]

It is.. We enjoy driving it.

[Holland]

I would buy an 02 just to do this swap.

[catuned]

I would buy an 02 just to do this swap.

Thanks! :) This is much better reaction then Im getting on that Umm 30tech place.. Jesus

Do it! Some good options with 2002's right now.

[camip]

Hmm sleeper if I ever did see one. Do want one.

[clutch-monkey]

is there any way to get the engine pushed back any? it looks pushed forward a little there in that photo.

[catuned]

We have moved the engine back almost an inch now. I will post new engine pics next week.

[clutch-monkey]

We have moved the engine back almost an inch now. I will post new engine pics next week.

awesome!

[Jean]

Thanks! :) This is much better reaction then Im getting on that Umm 30tech place.. Jesus

Do it! Some good options with 2002's right now.

Oh that place, why did you have to remind me. :yawn:

[catuned]

Some messed up ppl out there. There's a guy insists on bad mouthing other ppls work. He takes it and copies it. But hey that's to be expected.