M20 Silicone Air Intake Boots

[bmwandhonda]

It will be fine. This was modeled after the factory boot found on late models which only had one vacuum line coming off the throttle body as well

Thanks for the info mate

[gath]

I think this boots will never crack under normal use and also under boost, so ...

I'll be in for the late T shaped ICV with vacuum line like in this pic but am not very particular on the vacuum line.

[einstein57]

If 10 people want to pre-pay then i will. I have found that only about 50% of the people who sign up for group buys actually purchase them. I'm still sitting on over $10k worth of coilovers.

[gath]

It will be fine. This was modeled after the factory boot found on late modelswhich only had one vacuum line coming off the throttle body as well

http://i575.photobucket.com/albums/ss191/StevoM5/325i/DSC01326.jpg

Finito. There was not much interest in them. Took me over 2 years to sell 50 boots with a profit margin of about 10%.

Is it possible to do an "interest guage" where people will put down their names and commit to buy just to see if it's a viable # before you make them - like we have seen in other group buys.

[einstein57]

Hate to bring this up again, but I have since acquired a 'T' style icv and installing it all soon. Just confirming that the brake booster will be fine without the air feed from the boot. So will deleting the 'y pierce' and replacing with a straight piece of hose be fine?

Thanks again.

It will be fine. This was modeled after the factory boot found on late models which only had one vacuum line coming off the throttle body as well

i need one of these for my IX.... good god tell me they are still available??!? text me and let me know what youve got 774-289-2071

Finito. There was not much interest in them. Took me over 2 years to sell 50 boots with a profit margin of about 10%.

[imwhyteyo]

i need one of these for my IX.... good god tell me they are still available??!? text me and let me know what youve got 774-289-2071

[bmwandhonda]

It's very very easy to made the boot work on your car. Post a WTB ad for a T-shaped ICV, will probably cost $25 shipped. Next get a piece of brake booster rubber hose and eliminate the Y'd off pipe that goes in to your stock intake boot. No big deal at all!

Hate to bring this up again, but I have since acquired a 'T' style icv and installing it all soon. Just confirming that the brake booster will be fine without the air feed from the boot. So will deleting the 'y pierce' and replacing with a straight piece of hose be fine?

Thanks again.

[einstein57]

No. All gone.

[mscott]

as would i

[pharow]

Do you have anymore left? I would like to get one...

[einstein57]

6 boots left. B one of 44 people in the world (cause i have 3 and mr325 has 3) to have a bullet proof boot.

[einstein57]

True Seal stainless steel clamps are back in stock

[einstein57]

No 24v stuff

[jp_slick]

Buy some stuff

do you offer these for a 24v?

[einstein57]

Buy some stuff