Digital volt meter. Fits in OEM switch location!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Balleristic31
    replied
    Ok update that concerns me with the defroster wire use: just went to see what would happen if I switched the defroster on, and the voltmeter died and won't turn back on :( still have to diagnose but id steer clear of these wires for now

    Edit: fixed the issue by moving the voltmeters ground to the brown smaller ground wire on the defroster. Back to perfect again. I guess the big black ground wasn't a good spot. Either way just avoid it
    Last edited by Balleristic31; 01-10-2013, 03:21 PM.

    Leave a comment:


  • oliver.r
    replied
    what are you guys measuring?

    Leave a comment:


  • Balleristic31
    replied
    I connected my switched power and measure wire to the green/blue + on the defroster switch and the ground to the black ground wire going to the switch as well.

    Hope that helps someone!

    Leave a comment:


  • amcink
    replied
    Originally posted by uuc328
    I powered it from the radio wiring, these were close and labeled lol. Doesn't really matter where you get power from, as Balleristic31 posted the defroster switch is another close option. The leads are super short, I recommend extending them to ease the install.

    meter wiring/BMW (non OEM radio), factory wiring
    switched / red if switched from radio, gray with red stripe from OEM wiring?
    measure yellow if constant from radio, grey with orange stripe from OEM wiring?
    ground / black or make your own, brown

    test fit before gluing!!!
    Thanks - I will attempt it.

    Leave a comment:


  • uuc328
    replied
    Originally posted by amcink
    a quick DIY on how to install it will be helpful
    I powered it from the radio wiring, these were close and labeled lol. Doesn't really matter where you get power from, as Balleristic31 posted the defroster switch is another close option. The leads are super short, I recommend extending them to ease the install.

    meter wiring/BMW (non OEM radio), factory wiring
    switched / red if switched from radio, gray with red stripe from OEM wiring?
    measure yellow if constant from radio, grey with orange stripe from OEM wiring?
    ground / black or make your own, brown

    test fit before gluing!!!
    Last edited by uuc328; 01-10-2013, 06:54 AM.

    Leave a comment:


  • Balleristic31
    replied
    Installed mine tonight off the defroster wires. Works perfect! Thanks dude

    Leave a comment:


  • jaywood
    replied
    Originally posted by Lfore30
    Ill prob grab one since you're local and a friend, e know when younget more...still have those radio antenna plugs?
    Ok, just let me know.

    Yep, still got those too!

    Leave a comment:


  • Lfore30
    replied
    Ill prob grab one since you're local and a friend, e know when younget more...still have those radio antenna plugs?

    Leave a comment:


  • jaywood
    replied
    Yeah I have a few extra. I'll be ordering more soon as well. Yes they are easy to install! Just gotta tap into 2 or 3 wires depending on where you decide to get the power/signal from.

    Leave a comment:


  • Lfore30
    replied
    Is there still extras and are they easy to install?

    Leave a comment:


  • amcink
    replied
    Originally posted by uuc328
    this guy :p





    THANKS Jay! looks and works great.
    a quick DIY on how to install it will be helpful

    Leave a comment:


  • jaywood
    replied
    Glad to see it installed! Where are you getting your signal from?

    Leave a comment:


  • jaywood
    replied
    If I mailed yours out you will have tracking info on paypal!

    Leave a comment:


  • catuned
    replied
    Just got mine today. Thanks. Need to install.

    Leave a comment:


  • uuc328
    replied
    Originally posted by E30 331is
    Who were these mailed to?
    this guy :p





    THANKS Jay! looks and works great.

    Leave a comment:

Working...