“Bavauto” Headers Group Buy Round 2: Now with more headers [OFFICIALLY CLOSED]

[Bullet Ride]

I'm surprised at the lack of interest this time around. Make sure to pass the info on to your friends if they aren't on the forum.

[enigmaticdream]

Bump...

[Bearmw]

FYI after "exhaustive" research I have found that the Bavauto E28 M30 headers will work with a M30 swapped E30 without too much extra work.

[Bullet Ride]

friday bump

[MitchD1283]

Once I figure out taxes, I might be able to get a set

[Bullet Ride]

1 shy of a discount...

Two shy of the 10+ discount actually. One of the guys on the list is a 4-cyl header.

[enigmaticdream]

1 shy of a discount...

[Bullet Ride]

List update:
1. enigmaticdream, E30 325is, mid-section included with flanges, coated, 1 set (R3V)
2. Karmatose, E30 325is, mid-section included without flanges, coated, 1 set (R3V)
3. mscott, e30 325is, no mid-section, coated, 1 set (R3V)
4. structured, e30 325is, mid-section included, uncoated, 1 set (R3V)
5. SlamedIAm, e30 325is, mid-section included, coated, 1 set (R3V)
6. ealinn, e28 535is, mid section included, uncoated, 1 set (MyE28.)
7. rhouse181, e28 535is mid section included, uncoated, 1 set (MyE28.)
8. cm0180, e30 318i mid section included, uncoated, 1 set (R3V)
9. shwaa, e28 535is, mid section included, uncoated, 1 set (MyE28.)
10.
11.

[Bullet Ride]

Monday morning bump.

[cm0180]

1. enigmaticdream, E30 325is, mid-section included with flanges, coated, 1 set (R3V)
2. Karmatose, E30 325is, mid-section included without flanges, coated, 1 set (R3V)
3. mscott, e30 325is, no mid-section, coated, 1 set (R3V)
4. structured, e30 325is, mid-section included, uncoated, 1 set (R3V)
5. SlamedIAm, e30 325is, mid-section included, coated, 1 set (R3V)
6. ealinn, e28 535is, mid section included, uncoated, 1 set (MyE28.)
7. rhouse181, e28 535is mid section included, uncoated, 1 set (MyE28.)
8. cm0180, e30 318i mid section included, uncoated, 1 set (R3V)

[Bullet Ride]

List update:

1. enigmaticdream, E30 325is, mid-section included with flanges, coated, 1 set (R3V)
2. Karmatose, E30 325is, mid-section included without flanges, coated, 1 set (R3V)
3. mscott, e30 325is, no mid-section, coated, 1 set (R3V)
4. structured, e30 325is, mid-section included, uncoated, 1 set (R3V)
5. SlamedIAm, e30 325is, mid-section included, coated, 1 set (R3V)
6. ealinn, e28 535is, mid section included, uncoated, 1 set (MyE28.)
7. rhouse181, e28 535is mid section included, uncoated, 1 set (MyE28.)
8.
9.

[Bullet Ride]

Eventually there will be a cut off because Tubular will need to order the material. However the list isn't filling up as fast as last time so the cut off is likely a few weeks out at least. Once the material is ordered the, if Tubular isn't busy with other work the turn around will be something like 3-4 weeks for uncoated headers.

[Mlarsen]

Is there going to be deadline on this group buy and what is the expected turn around time once funds are sent?

[SlamedIAm]

1. enigmaticdream, E30 325is, mid-section included with flanges, coated, 1 set (R3V)
2. Karmatose, E30 325is, mid-section included without flanges, coated, 1 set (R3V)
3. mscott, e30 325is, no mid-section, coated, 1 set (R3V)
4. structured, e30 325is, mid-section included, uncoated, 1 set (R3V)
5. SlamedIAm, e30 325is, mid-section included, coated, 1 set (R3V)
6.

[Bullet Ride]

Damn it, man. Of course these come out a month after I grenaded my M20 and bought an S52. :(

When you say grenaded M20 all I hear is a good excuse to build an M20 stroker in which you'd want a set of these headers :drink: