“Bavauto” Headers Group Buy Round 2: Now with more headers [OFFICIALLY CLOSED]

[Bullet Ride]

I'm assuming the 4 cylinder header isn't gonna happen, since I'm the only one that wants one?

No, you'll still get them, it'll just be for the 1-5 price

Count me in for an E30 with mid section. Not coated

Sent from my Galaxy Nexus using Tapatalk 2

Added. Thanks.

I'm still on the fence about getting them ceramic coated. Is there a definite cost yet?

As I mentioned, budget around $200 for coating, last time I think it was about $180.

List Update:

1. enigmaticdream, E30 325is, mid-section included with flanges, coated, 1 set (R3V)
2. Karmatose, E30 325is, mid-section included without flanges, coated, 1 set (R3V)
3. mscott, e30 325is, no mid-section, coated, 1 set (R3V)
4. structured, e30 325is, mid-section included, uncoated, 1 set (R3V)
5. SlamedIAm, e30 325is, mid-section included, coated, 1 set (R3V)
6. ealinn, e28 535is, mid section included, uncoated, 1 set (MyE28.)
7. rhouse181, e28 535is mid section included, uncoated, 1 set (MyE28.)
8. cm0180, e30 318i mid section included, uncoated, 1 set (R3V)
9. shwaa, e28 535is, mid section included, uncoated, 1 set (MyE28.)
10. danderson, e30 325i, mid section included with flanges, coated, 1 set (R3V)
11. MitchD1283, e30 325i, mid-section included, uncoated, 1 set (R3V)
12.
13.

[danderson]

Alright, I'll go with coated. Thanks.

[enigmaticdream]

Bumpppp

[Bullet Ride]

All right guys, I'm going to be shutting down this group buy at the end of the month. If you're interested get in now because I probably won't be doing another one for a while.

[karmatose]

I'm honestly shocked there's not more interest.

[SlamedIAm]

I'm honestly shocked there's not more interest.

As am I. Thanks again to Bullet Ride for providing this product to us.

[enigmaticdream]

Yes, thanks Bullet Ride.

[karmatose]

Yes, thanks Bullet Ride.

As am I. Thanks again to Bullet Ride for providing this product to us.

+1. A real asset to the community.

[brian52555]

I'm interested but wondering what shipping to San Francisco would be like for a set of these?

[Bullet Ride]

I'm interested but wondering what shipping to San Francisco would be like for a set of these?

Last time shipping to California was ~$63. However shipping will be slightly more expensive for everyone this time because Tubular will be factoring in the time and materials to package things up and do the paper work (it ended up costing them more than they though it would last time and the aren't willing to eat that cost again which is understandable).

[brian52555]

Thanks dude - going to mull it over for the next few days. Just need to run a cost/benefit analysis through my head... i.e. cost of aftermarket cat, labor to weld everything up, and potential hassle of having to deal with CA smog every 2 years as most aftermarket cats don't have as much of the precious metals as the stock cat.

FYI awesome job and thanks for doing this for the community.

[brian52555]

Hmm - last question for now. Seemed like one guy in the last thread was having trouble due to the O2 sensor location of the bung. Is this a widespread problem or isolated? Also I thought that the stock o2 sensor is able to read both "banks" of cylinders, it looks like these headers only read off a set of 3? Is that going to pose a problem for the computer?

[Pocket Chant]

Hmm - last question for now. Seemed like one guy in the last thread was having trouble due to the O2 sensor location of the bung. Is this a widespread problem or isolated? Also I thought that the stock o2 sensor is able to read both "banks" of cylinders, it looks like these headers only read off a set of 3? Is that going to pose a problem for the computer?

Yo, that was me. I ended up grabbing a universal one from ebay and splicing it in. It works fine.

[delatlanta1281]

Yo, that was me. I ended up grabbing a universal one from ebay and splicing it in. It works fine.

I did the same, no problems here.

[Bullet Ride]

List Update:

1. enigmaticdream, E30 325is, mid-section included with flanges, coated, 1 set (R3V)
2. Karmatose, E30 325is, mid-section included without flanges, coated, 1 set (R3V)
3. mscott, e30 325is, no mid-section, coated, 1 set (R3V)
4. structured, e30 325is, mid-section included, uncoated, 1 set (R3V)
5. SlamedIAm, e30 325is, mid-section included, coated, 1 set (R3V)
6. ealinn, e28 535is, mid section included, uncoated, 1 set (MyE28.)
7. rhouse181, e28 535is mid section included, uncoated, 1 set (MyE28.)
8. cm0180, e30 318i mid section included, uncoated, 1 set (R3V)
9. shwaa, e28 535is, mid section included, uncoated, 1 set (MyE28.)
10.danderson, e30 325i, mid section included with flanges, uncoated or coated, 1 set (R3V)
11. MitchD1283, e30 325i, mid-section included, uncoated, 1 set (R3V)
12. dh356, 2002, coated, 1 set (2002faq)
13. Mlarsen, 325i, mid-section included with flanges, uncoated, 1 set (R3V)
14.
15.