APEX | 17" 4-Lug ARC-8 Pre Group-Buy Discussion Thread

[E30xium]

Any issues fitting these amazing wheels on an Air Lift Front and Rear Suspension?

[FLG]

Ryan what is the required minimum for them to go into production?

Sent from my SM-N920V using Tapatalk

[APEX Race Parts]

Schweet, was hoping one of these was still around. Such a good looking wheel! Added myself (or will, looking into fitment stuffs)

Appreciate your participation :razz:

So what's the deal with people being "Interested" but not Pledging?
Free Bump.

:nice:

We need interested enthusiasts to pledge now to keep the momentum going! With 3 days left on the clock we have 65 wheels pledged for; 36 in favor of the 17x8.5 et20, and 29 in favor of the 17x8 et25. Keep in mind we must meet our minimum production requirement for each sku to get produced, so everyone’s participation is vital to the Group Buy’s success. It’s still very possible both sizes get produced as we historically get 50% of checkouts in the last 1-2 days.

If you are waiting to pledge because you have questions about the product, please contact an APEX product specialist today. This is your one opportunity to get your hands on these lightweight, E30 specific, flow-formed wheels, so let's finish this deal out strong!

- Ryan

[openhand]

So what's the deal with people being "Interested" but not Pledging?
Free Bump.

[BaltimoreBimmer]

Schweet, was hoping one of these was still around. Such a good looking wheel! Added myself (or will, looking into fitment stuffs)

[APEX Race Parts]

Our Group Buy for the ARC-8 17x8 ET25 (Flat-Faced) and 17x8.5 ET20 (Concave) is now live! Click here for more information.

-Matt

[Major]

Awesome!! Thank you Apex. I hope we meet the minimum requirement for the 17x8.5 now.

Yeah well done guys, this was a great solution, I'm sure you'll get the volumes you wanted now!

[ian e30 318is]

Time to work some ot lol, id like a set so badly

Sent from my SM-N920V using Tapatalk

Get it!! We need more interest this time around! :up:

[Fidhle007]

So an 8 and an 8.5 but no 9? That makes no sense to me... Oh well, I'm out. Pity, I need a LOT of wheels...

[FLG]

Time to work some ot lol, id like a set so badly

Sent from my SM-N920V using Tapatalk

[ian e30 318is]

After much deliberation with the team, we have decided to give the 4 Lug ARC-8 17x8.5 et20 concave wheel another chance. To keep things concise:

• The current Group Buy will close out as planned, and any authorizations made for the $200 deposit will be void
• The 17x8.5 concave wheel will now be offered as part of the upcoming Group Buy for the 17x8” flat faced wheels. We’re adding it as an alternate choice.
• The 17x9” wheel was not popular enough to pursue further
• The new Group Buy is scheduled to start tonight. (8/18 12:00AM PST) and end midnight 8/25 PST

Combining these two sku’s in the upcoming Group Buy increases our chances to reach higher discount tiers, and gives the community the possibility of successfully producing both sku’s should demand meet or surpass our minimum production requirements for each. If minimum requirements are only met on one sku, we will proceed accordingly.

- Ryan

Awesome!! Thank you Apex. I hope we meet the minimum requirement for the 17x8.5 now.

[APEX Race Parts]

After much deliberation with the team, we have decided to give the 4 Lug ARC-8 17x8.5 et20 concave wheel another chance. To keep things concise:

• The current Group Buy will close out as planned, and any authorizations made for the $200 deposit will be void
• The 17x8.5 concave wheel will now be offered as part of the upcoming Group Buy for the 17x8” flat faced wheels. We’re adding it as an alternate choice.
• The 17x9” wheel was not popular enough to pursue further
• The new Group Buy is scheduled to start tonight. (8/18 12:00AM PST) and end midnight 8/25 PST

Combining these two sku’s in the upcoming Group Buy increases our chances to reach higher discount tiers, and gives the community the possibility of successfully producing both sku’s should demand meet or surpass our minimum production requirements for each. If minimum requirements are only met on one sku, we will proceed accordingly.

- Ryan

[PaintPro21]

Why not just offer the single option of 17x8.5 et20 and keep the payment phase open for another week? Like it was said before, people will adapt to the final option that is put on the table. A decision just needs to be made by Apex for the final specs.

We are reviewing all option. We've been stuck with inventory that sits for 3+ years many times in the past. We'll come back to the group with a response. The deal will either:

1. close and all deposits are voided.
2. We'll offer an extension (with volunteer participation for those already signed up).
3. Reduce the minimum quantity to produce, but this would require participation from members at the discount level that matches that lower volume.

Why don't you post a poll in a new thread? Then, you can see which size gets the most love, as far as the concaves go. They have a poll option at the bottom when you make a new thread.

unfortunately a new system (Panjo) has been implemented. When we try to make a new thread it's now a classified listing on a non standard system. We've been reviewing alternatives for forum communication. Our preference is to use the Group Buy site.

[supermansocks95]

The proposed concave profile and wider wheel width were idea's brewed from within the community. Many enthusiasts reciprocated, however when it came down to obtaining valuable feedback from said interested parties in regards to desired offsets, we experienced radio silence. The beauty of the Group Buy platform is that we can cultivate organic idea's from the community, and with proper demand we can bring these products to market at discounted prices. Needless to say, this can be an extremely valuable tool within a niche community where quality product choices are scarce. None of this works if the demand does not support our production minimums, or if the community is in disarray over the final specifications of said product. A proposed product could have hundreds of enthusiasts interested in introductory phases of a Group Buy, but if only a fraction of these interested enthusiasts choose to move forward with the purchase, it is simply validation that their was not enough demand for this product to exist within this corner of the market.

We agree that final offsets should have been a mandatory criteria prior to entering into an official payment phase, and will implement this stipulation going forward. We treat every Group Buy, especially those that involve introducing a completely new sku, as a learning experience. We appreciate all of the feedback, and hope that the "tried and true" profile 1 face Group Buy, opening on 8/18 will be a success.

- Ryan

Why don't you post a poll in a new thread? Then, you can see which size gets the most love, as far as the concaves go. They have a poll option at the bottom when you make a new thread.

[Major]

Why not just offer the single option of 17x8.5 et20 and keep the payment phase open for another week? Like it was said before, people will adapt to the final option that is put on the table. A decision just needs to be made by Apex for the final specs.

This!