Originally posted by elcoy
View Post
Announcement
Collapse
No announcement yet.
5 Lug and BBK Group Buy Round 2 **NOW SHIPPING KITS
Collapse
X
-
Originally posted by Pancho22 View PostWhat would be the price of a half kit?
Originally posted by 95///M3 View PostThe ABS ring on the front E36 hubs contacts the sensor. Am I using the wrong front bearing?The Lineup in order of appearance:
91 535i
91 318is 5 Lug/E46M3 Brakes
91 325is w/ S52
88 Vert Plastic Bumper Swap
88 M3 ;D
91 325ix 5 speed
89 Vert Royalblau Metallic
73 2002
1986 325es --> is swap Rallycross Car!!
1995 Chevy G30 Tow Rig... *I SOLD A CAR!!*
1993 525i Granitsilber Metallic Touring
Need a 91 M5 bad but wife would shoot me...twice
*UPDATE: got a 93 M5 and still alive
1972 Jeep Wagoneer
1975 2002 five speed
Check out:
Elhartspeedshop.com
sigpic
Comment
-
Originally posted by Pancho22 View PostWondering about the front half
$335 Front
$135 RearThe Lineup in order of appearance:
91 535i
91 318is 5 Lug/E46M3 Brakes
91 325is w/ S52
88 Vert Plastic Bumper Swap
88 M3 ;D
91 325ix 5 speed
89 Vert Royalblau Metallic
73 2002
1986 325es --> is swap Rallycross Car!!
1995 Chevy G30 Tow Rig... *I SOLD A CAR!!*
1993 525i Granitsilber Metallic Touring
Need a 91 M5 bad but wife would shoot me...twice
*UPDATE: got a 93 M5 and still alive
1972 Jeep Wagoneer
1975 2002 five speed
Check out:
Elhartspeedshop.com
sigpic
Comment
-
I just wanted to post and let everyone know that E38 style 5's 16x8 et23 fit with this kit and E46M3 brakes on the front. So you are not limited to 17" and bigger wheels.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
Originally posted by rzerob View PostI just wanted to post and let everyone know that E38 style 5's 16x8 et23 fit with this kit and E46M3 brakes on the front. So you are not limited to 17" and bigger wheels.
do you have pics for front calipers clearance?[ETA - E30 Adapters] 5 Lug kit with e46m3 front and e46 325/328i rear brake setup
---------------------------------------------------------------
[ETA - E30 Adapters] - 5 Lug kit | DTM Shifter | DSSR
---------------------------------------------------------------
Transaction Feedback
Comment
-
For me I had to use a 3mm spacer to make a few mm clearance with new pads (there is a little more than appears at this angle) it isn't a diameter issue but the outer edge of the caliper hitting the curved transition to the barrel
Last edited by whodwho; 06-19-2016, 08:14 AM.
Comment
-
Originally posted by ngampleh View Postdo you have pics for front calipers clearance?Originally posted by whodwho View PostFor me I had to use a 3mm spacer to make a few mm clearance with new pads (there is a little more than appears at this angle) it isn't a diameter issue but the outer edge of the caliper hitting the curved transition to the barrel
Whodwho how long are your studs? Do they fit behind the caps? Where did you buy them?How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
5 Lug and BBK Group Buy Round 2
Originally posted by whodwho View PostFor me I had to use a 3mm spacer to make a few mm clearance with new pads (there is a little more than appears at this angle) it isn't a diameter issue but the outer edge of the caliper hitting the curved transition to the barrel
I cant see the 1st pic..
Originally posted by rzerob View PostI can take pics but it is as Whodwho says. The calipers just barely touch the curved part of the barrel. I took a grinder to the caliper a hit the edges that were touching. I barely took anything off and they fit perfect. They were touching by about a millimeter. But a small spacer will do the same thing.
Got it, grinder the caliper only..
and the caliper carrier is free from barrel curved?Last edited by ngampleh; 06-18-2016, 09:03 PM.[ETA - E30 Adapters] 5 Lug kit with e46m3 front and e46 325/328i rear brake setup
---------------------------------------------------------------
[ETA - E30 Adapters] - 5 Lug kit | DTM Shifter | DSSR
---------------------------------------------------------------
Transaction Feedback
Comment
-
Originally posted by ngampleh View PostGot it, grinder the caliper only..
and the caliper carrier is free from barrel curved?How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
Originally posted by rzerob View Post...
Whodwho how long are your studs? Do they fit behind the caps? Where did you buy them?
Comment
-
Originally posted by whodwho View PostThey do fit under the caps and they are the 57mm from here - http://www.r3vlimited.com/board/showthread.php?t=206133How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
-
Here is a couple pics of where the wheel was touching the caliper. You can see the ring it made on the wheel.
Here are a couple of pics of where I used the grinder on the caliper. I had already painted over it but you can still see.
And I tried to take a couple of pics of the clearance between the caliper and wheel. I don't have a camera so all my pics are with a cellphone sorry for the bad quality. I hope it helps.
Originally posted by whodwho View PostThey do fit under the caps and they are the 57mm from here - http://www.r3vlimited.com/board/showthread.php?t=206133How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
Comment