Strong Butt Strutt (for e30 convertibles)

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • e30Matt
    replied
    The placebo effect is a wonderful thing.

    Referring to rear strut bars, of course.

    Leave a comment:


  • BENdashdash
    replied
    Well..?

    Leave a comment:


  • Jordan325iC
    replied
    That would be cool, you could count me in, assuming they are reasonably priced.

    Leave a comment:


  • nickmp0wer
    replied
    I *think* i will be making these in the next few weeks

    Leave a comment:


  • MattE30
    replied
    Originally posted by golde30
    my rear strut bar definately made a difference. the rear end has less lean on hard turns. maybe u dont drive your car hard enough to notice a difference? ;)
    What springs are you running?

    Leave a comment:


  • ToplessE30
    replied
    Originally posted by Saul325is
    Originally posted by BS87
    For 355$ it looks like something you can fab up if you have the skills.
    I agree. I can probably fab that up today in engineering, if I get the exact specifications
    Absolutely, CAD program, machine shop, ... TADA.

    Leave a comment:


  • golde30
    replied
    Originally posted by Thomas H
    Originally posted by Jon '92 325ic
    I really don't see how it works, A friend of mine purchased one for his 325e and I could not tell any difference before or after. Then again his car has new subframe bushings
    Probably wouldn't notice much of a difference on a hard top. These are made for convertibles which aren't able to accommodate a rear strut bar because of the top compartments.
    I think upper “shock bars” are a waste of money, I might believe they do something if a spring was mounted along with a shock in the same location. My VW GTi rear strut bars did something.
    my rear strut bar definately made a difference. the rear end has less lean on hard turns. maybe u dont drive your car hard enough to notice a difference? ;)

    Leave a comment:


  • ilia
    replied
    Originally posted by e30sd
    bullshit son
    Bullshit? Drill some holes at length, get a bender, bend the strip at length, call it a day. Anyone who says that can't be made hasn't worked in a machine shop.

    Leave a comment:


  • Thomas H
    replied
    Originally posted by Jon '92 325ic
    I really don't see how it works, A friend of mine purchased one for his 325e and I could not tell any difference before or after. Then again his car has new subframe bushings
    Probably wouldn't notice much of a difference on a hard top. These are made for convertibles which aren't able to accommodate a rear strut bar because of the top compartments.
    I think upper “shock bars” are a waste of money, I might believe they do something if a spring was mounted along with a shock in the same location. My VW GTi rear strut bars did something.

    Leave a comment:


  • Jon '92 325ic
    replied
    I really don't see how it works, A friend of mine purchased one for his 325e and I could not tell any difference before or after. Then again his car has new subframe bushings
    Probably wouldn't notice much of a difference on a hard top. These are made for convertibles which aren't able to accommodate a rear strut bar because of the top compartments.

    Leave a comment:


  • Thomas H
    replied
    I really don't see how it works, A friend of mine purchased one for his 325e and I could not tell any difference before or after. Then again his car has new subframe bushings

    Leave a comment:


  • Saul325is
    replied
    Originally posted by BS87
    Originally posted by Saul325is
    Originally posted by BS87
    For 355$ it looks like something you can fab up if you have the skills.
    I agree. I can probably fab that up today in engineering, if I get the exact specifications
    I doubt you could fab up exact copies. But you could get something close that probably does almost the same thing.
    I never said exact copies, give me exact specifications and I could probably make somthing similar.

    -Saul[/i]

    Leave a comment:


  • nickmp0wer
    replied
    it seems like one woudl be pretty easy to make, and mayb square tubing could even be used

    Leave a comment:


  • BS87
    replied
    Originally posted by Saul325is
    Originally posted by BS87
    For 355$ it looks like something you can fab up if you have the skills.
    I agree. I can probably fab that up today in engineering, if I get the exact specifications
    I doubt you could fab up exact copies. But you could get something close that probably does almost the same thing.

    Leave a comment:


  • e30sd
    replied
    Originally posted by Saul325is
    Originally posted by BS87
    For 355$ it looks like something you can fab up if you have the skills.
    I agree. I can probably fab that up today in engineering, if I get the exact specifications
    bullshit son

    Leave a comment:

Working...