Strong Butt Strutt (for e30 convertibles)

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • pantelones
    replied
    Eh, google it? 1st page on the list...

    Yeah, $300+ for something that I could make in less than 2 hours including lathe work... It's about $20 in steel including the 2 cut charge at the metal depot, and maybe $60 if you have them press brake the bends. Honestly, I bet those "results" are nothing more than the action of re-torquing the sub-frame bolts, and 20nm less of stress put on the sub-frame. IF that... Butt dyno to the maaaaaaax! This is far stupider than the silly skid plate people attach to their radiator core support! ;D

    Leave a comment:


  • glucklich21
    replied
    Pics?

    My 5 lug cabrio has miles of ground clearance.

    Leave a comment:


  • ejnight
    replied
    Originally posted by CorvallisBMW
    Did anyone ever end up making these things? 'Cause I'm about to make one this week before I put my subframe back in to the convertible.

    EDIT: Has onyone put one of these on a heavily modded car? One with stiffer springs and bigger sway bars?
    I did and its low.

    Originally posted by fporro
    bought one for $ 120 from a z3 guy., way too heavy and not much clearance on lowered setups.

    This

    eventually traded it for a tow job, yez.

    Leave a comment:


  • Vivek
    replied
    What exactly is this? Connects the bottom of the subframe mounts together?

    Leave a comment:


  • fporro
    replied
    bought one for $ 120 from a z3 guy., way too heavy and not much clearance on lowered setups.

    eventually traded it for a tow job, yez.

    Leave a comment:


  • tonytony
    replied
    bored and browsing around and after seeing pics of it installed i still dont see how much good it'll do. the subframe is a pretty solid piece of metal so i dont see how this piece of metal will solve anything, besides looking kool.

    Leave a comment:


  • CorvallisBMW
    replied
    Did anyone ever end up making these things? 'Cause I'm about to make one this week before I put my subframe back in to the convertible.

    EDIT: Has onyone put one of these on a heavily modded car? One with stiffer springs and bigger sway bars?
    Last edited by CorvallisBMW; 04-08-2008, 12:46 PM.

    Leave a comment:


  • nefarious7907
    replied
    I have heard that if you were to tie a string from one shock to another, and jacked up one corner of the car either front or rear that there is enough twist in the chassis that it will cause the string to bow.

    Leave a comment:


  • Aptyp
    replied
    I think this is a slightly more expensive, but a painless way of replacing rear subframe bushings. And to all the people with rear shock tower braces, they DO NOT WORK. The way e30 suspension is set up, you have to connect the top of the subframe to the upper spring mounts (that has to be done through inside, in a form of a roll cage). Again this is based on tracking my hard top, Z3's and IC's may be different, but how many people track convertables?

    Leave a comment:


  • e30paradise
    replied
    Originally posted by e30sd
    bullshit son
    you have no clue. If you have one to get dimension off of, you can make one in a few hours max. That is probably the easiest part to make I have ever seen. As another poster said...if you think that is hard to make you have probably never seen a machine shop.

    Leave a comment:


  • nefarious7907
    replied
    Thats so freakin rediculously overpriced, $100 or less and I am game.

    Leave a comment:


  • thereisnoyun
    replied
    freaken piece of metal

    I doubt it'll cost you that much if you go to a body shop and have them fab it and install it for you... Thats fucken ridiculous to pay for a chunk of metal

    Leave a comment:


  • sbullard878
    replied
    making my own

    I think i'm going to make one of these out of 1/2 inch 1/8th wall tubing like I did my front strut bar will cost about 35 bucks
    Attached Files

    Leave a comment:


  • Insanity
    replied
    Strut bars are not useless. I've seen a number of people claim that they're just for show and don't do anything, however, a number of people have done quite a lot of independent tests that show the bar will generally experience upwards of 300lbs of expansive or contractive forces under various driving conditions.

    Leave a comment:


  • golde30
    replied
    Originally posted by e30Matt
    The placebo effect is a wonderful thing.

    Referring to rear strut bars, of course.
    Originally posted by e30Matt
    Just want to add a comment... I had one of these on my 318is, and with M3 springs it really helped tie the rear end in in corners. The rear suspension definitely reacted more as a whole at turn-in, and the car felt much more planted. I had to remove mine due to ground clearance issues after I put the GCs on, though.

    My friend Carl now runs it on his ///M Coupe, and he says it makes a world of difference.
    hehe.

    Leave a comment:

Working...