Originally posted by FredK
View Post
Announcement
Collapse
No announcement yet.
Por 15 Starter Kit
Collapse
X
-
Originally posted by FredK View PostPaint Over Rust = POR. It bonds better to rust than bare steel, even etched steel. What you do is you remove the loose rust, then use their degreaser, then etching solution, then apply the POR-15. Check Ebay, there's a vendor that sells the starter kits on there.Originally posted by cabriodster87"Honey? What color is this wire? Is it the same as that one? Are you sure? I don't believe it. OK, it works. Thank you sweetie."Originally posted by Kershawi've got a boner and a desire to speed.
Comment
-
I did the entire inside of my trunk with the starter kit I have pictures of before and after, it wasnt rusty before but I did it as a preventitive thing, and I am going to be doing the entire underside of my car with POR15, I already did my M3 rear sway bar and it turned out great it was one of the only paints that I could find that would flex, so I could paint my sway bar. I am planning on doing my diff case and trailing arms and subframe when I go in to replace the bushings. I tried POR20 on my exhaust manifolds and it has held up great it hasnt flaked off, and it has kept its color, well worth the money. I am going to get around to doing my downpipes and around some welds on my exhaust sooner or later with the POR20 I had left over.
Comment
-
I just ordered some right now. My car is going to get owned by this shit lol.Originally posted by cabriodster87"Honey? What color is this wire? Is it the same as that one? Are you sure? I don't believe it. OK, it works. Thank you sweetie."Originally posted by Kershawi've got a boner and a desire to speed.
Comment
-
Originally posted by Mike325 View PostI just ordered some right now. My car is going to get owned by this shit lol.
Comment
-
Originally posted by nefarious7907 View PostAnd so are your hands and arms for about a week after you apply it :)Originally posted by cabriodster87"Honey? What color is this wire? Is it the same as that one? Are you sure? I don't believe it. OK, it works. Thank you sweetie."Originally posted by Kershawi've got a boner and a desire to speed.
Comment
-
Originally posted by Mike325 View PostNo way dudz, I got teh glovez.:up:
Comment
-
Originally posted by NC325iC View Postwhats the heat capability of this stuff?
Comment
-
I had a fuel return line that had some srface rust on and after the dealer screwed up twice by getting me the wrong line, I tried this. It works great and easy to use. Does not smell bad either. Just don't get it on your hands. Still on me after 2 days, and I do shower, with soap.Originally posted by cabriodster87"Honey? What color is this wire? Is it the same as that one? Are you sure? I don't believe it. OK, it works. Thank you sweetie."Originally posted by Kershawi've got a boner and a desire to speed.
Comment
Comment