C3 Motorsport coilover kit

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • silversleeper
    R3VLimited
    • Mar 2005
    • 2032

    #16
    Originally posted by DaveCN
    No, unless you are running something too wide and/or with too low of an offset.
    I plan on running 15X8 +0, with fender rolling. But I was researching the GC setup because I am about ready to buy a setup for my car, but I recall some people saying that the 5" spring was too short. They said it was tucking fender at the highest setting.
    Claus Luthe is my hero.

    Comment

    • matt
      No R3VLimiter
      • Oct 2003
      • 3731

      #17
      Originally posted by silversleeper
      I plan on running 15X8 +0, with fender rolling. But I was researching the GC setup because I am about ready to buy a setup for my car, but I recall some people saying that the 5" spring was too short. They said it was tucking fender at the highest setting.
      So get a taller spring...

      Comment

      • Dave
        E30 RAT
        • Nov 2003
        • 11675

        #18
        Originally posted by silversleeper
        I plan on running 15X8 +0, with fender rolling. But I was researching the GC setup because I am about ready to buy a setup for my car, but I recall some people saying that the 5" spring was too short. They said it was tucking fender at the highest setting.
        Those SPort Max ones? I saw some on fleaBay that were a better offset - either +15 or +20, also 15x8.
        Current Cars
        2014 M235i
        2009 R56 Cooper S
        1998 M3
        1997 M3

        Comment

        • erik325i
          No R3VLimiter
          • Jan 2005
          • 3567

          #19
          Originally posted by silversleeper
          I plan on running 15X8 +0, with fender rolling. But I was researching the GC setup because I am about ready to buy a setup for my car, but I recall some people saying that the 5" spring was too short. They said it was tucking fender at the highest setting.
          No, they are not too short at all. I set the height to a middle setting, and the ride height is still a bit too tall. I am going to lower the front and back a little bit more whenever I get a free day.

          -Erik

          Comment

          • silversleeper
            R3VLimited
            • Mar 2005
            • 2032

            #20
            Originally posted by erik325i
            No, they are not too short at all. I set the height to a middle setting, and the ride height is still a bit too tall. I am going to lower the front and back a little bit more whenever I get a free day.

            -Erik
            well, in that case, ima go ahead and send slyder a pm and get this order started hopefully sometime soon.
            Claus Luthe is my hero.

            Comment

            • 2002maniac
              R3V Elite
              • Feb 2005
              • 4260

              #21
              Originally posted by erik325i
              No, they are not too short at all. I set the height to a middle setting, and the ride height is still a bit too tall. I am going to lower the front and back a little bit more whenever I get a free day.

              -Erik
              Well a 750lb spring will not sag as much as a softer spring. i can see 5" springs being to short for the soft setups most people like.

              *edit* Those a f'ing stiff springs! I run 650 in the rear and i can hardly stand it anymore.

              Comment

              • erik325i
                No R3VLimiter
                • Jan 2005
                • 3567

                #22
                Originally posted by 2002maniac
                Well a 750lb spring will not sag as much as a softer spring. i can see 5" springs being to short for the soft setups most people like.
                True, with a softer spring, they may sag a bit lower. There was still plenty of adjustment left for me to raise the car up a lot more though if I wanted.
                I don't see any problems with it unless you wanted the back end up as high as stock for that muscle-car rake look.
                Originally posted by 2002maniac
                *edit* Those a f'ing stiff springs! I run 650 in the rear and i can hardly stand it anymore.
                It doesn't seem too bad for me. It works out nicely with no rear swaybar.

                -Erik

                Comment

                • japspecvr6
                  Mod Crazy
                  • Apr 2005
                  • 602

                  #23
                  sweet........

                  M52 |S52 Cams|E36 Rack Swap|GC Coilover Kit |. . . . . . . . . More To Come

                  Comment

                  • silversleeper
                    R3VLimited
                    • Mar 2005
                    • 2032

                    #24
                    Originally posted by erik325i
                    There was still plenty of adjustment left for me to raise the car up a lot more though if I wanted.
                    okay, i just wanted to make sure. i was reading up on the GC kits regarding that issue for the facelifted e30s as the rear fenders are lower. i wasn't until recently that i realized that this kit is NOT GC, but rather a completely new creation by C3 Motorsport.
                    Claus Luthe is my hero.

                    Comment

                    • BrandC
                      E30 Addict
                      • Jul 2006
                      • 444

                      #25
                      Originally posted by erik325i

                      It doesn't seem too bad for me. It works out nicely with no rear swaybar.

                      -Erik
                      Is there any chance that without the RSB, the rear coilover springs should pop out? I want to run no RSB, but I'm afraid that on the street, hitting a pothole might release the spring.


                      -Brandon

                      Comment

                      • IS
                        Grease Monkey
                        • Jul 2005
                        • 366

                        #26
                        450/750 is a good setup...pretty identical to my 440/700 once you factor in the lack of the rear swaybar.

                        A 5inch spring is definitely not too short, as I have my adjusters 1/4" from all the way down w/ a 700# spring. In fact, anything longer than 5.5" will not give you enough negative adjustment with high spring rates. I'm running about the lowest rear ride height that still maintains a reasonable amount of travel both front and rear w/ zero rake & bilsteins.
                        87 325IS - Delphin Grey/Cardinal

                        Comment

                        • erik325i
                          No R3VLimiter
                          • Jan 2005
                          • 3567

                          #27
                          Originally posted by BrandC
                          Is there any chance that without the RSB, the rear coilover springs should pop out? I want to run no RSB, but I'm afraid that on the street, hitting a pothole might release the spring.
                          I doubt the springs will pop out if you hit a pothole. When i jack up the back end of my car up, I am able to pull the spring/adjuster out but it's not so loose that it will just fall out.

                          It also helps that the rear Konis are short-bodied.

                          -Erik

                          Comment

                          • erik325i
                            No R3VLimiter
                            • Jan 2005
                            • 3567

                            #28
                            **Update**

                            I just got back from Thunderhill racetrack and I couldn't be happier about how my car handled.
                            Here is how it is currently setup:

                            450f/750r spring rates
                            cabrio front swaybar (with stock non-M endlinks)
                            No rear swaybar
                            215/40-17 Toyo T1R

                            Also note that I didn't have enough time to realign my car before heading out, so I am still on my street alignment (only -2.2* camber up front) which explains the slight hint of understeer when diving into the turns.

                            I was ready to play around with different swaybars depending how everything handled at the track, but now I am going to leave everything as it is. The only thing I am going to change for next time is add a little bit more neg camber up front.

                            -Erik

                            Comment

                            • silversleeper
                              R3VLimited
                              • Mar 2005
                              • 2032

                              #29
                              FINALLY got around to getting the coilovers installed (courtesy of Jeff a.k.a. e30_325es)! He is brilliant in the garage, and for his first time strut modification he accomplished it perfectly!

                              My praises to Jeff aside, I am still grinning from the drive home! This kit is incredibly smooth, and corners so flat, I absolutely love it! It broke the bank for me, but I had to have it. It sat in my trunk for a few months, but now that its on, I'm glad I went with it.

                              I highly recommend this kit for anyone that wants to transform an otherwise stock e30 (which still handles impressively) into a street/track worthy beast! I am running no rear sway and there is still plenty of oversteer in her.

                              Stiffening things up at all corners definitely made an improvement in ride quality. It is a lot smoother than my well aged stock setup. And power delivery to the pavement has drastically improved! Now to get new tires to match the handling!
                              Claus Luthe is my hero.

                              Comment

                              • alexbaby88
                                Wrencher
                                • Feb 2005
                                • 219

                                #30
                                Erik - Do you have pics of your car with the coilovers on?

                                Comment

                                Working...